ANNEXES to the proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles - Hoofdinhoud

Regulation (EU) No 1008/2010 i 19

28A Rear fog lamps Regulation (EC) X X X X X X X X X X X

for power No 661/2009 driven vehicles

and their trailers UNECE Regulation No 38

29A Reversing lights Regulation (EC) X X X X X X X X X X X

for power No 661/2009 driven vehicles

and their trailers UNECE Regulation No 23

30A Parking lamps Regulation (EC) X X X X X X

for power No 661/2009

driven vehicles UNECE Regulation

No 77

31A Safety-belts, Regulation (EC) X X X X X X

restraint No 661/2009 X

systems, child

restraint UNECE Regulation systems and No 16

Isofix child restraint systems

32A Forward field of Regulation (EC) X

vision No 661/2009

UNECE Regulation No 125

33A Location and Regulation (EC) X X X X X X

identification of No 661/2009 hand controls,

tell-tales and UNECE Regulation indicators No 121

34A Windscreen Regulation (EC) X ( 5 ) ( 5 ) ( 5 ) ( 5 ) ( 5 )

defrosting and No 661/2009 demisting

systems Commission Regulation (EU)

No 672/2010 18

35A Windscreen Regulation (EC) X ( 6 ) ( 6 ) ( 6 ) ( 6 ) ( 6 )

wiper and No 661/2009 X

washer systems Commission

36A Heating systems Regulation (EC) X X X X X X X X X X X

No 661/2009

UNECE Regulation No 122

37A Wheel guards Regulation (EC) X

No 661/2009

38A Head restraints Regulation (EC) X

(headrests), No 661/2009 whether or not

incorporated in UNECE Regulation vehicle seats No 25

41A Emissions Regulation (EC) X( 9 ) X( 9 ) X X( 9 ) X( 9 ) X

(Euro VI) heavy No 595/2009 X

duty vehicles/access to information

42A Lateral Regulation (EC) X X X X X

protection of No 661/2009

goods vehicles UNECE Regulation

No 73

18 Commission Regulation (EU) No 672/2010 i of 27 July 2010 concerning type-approval requirements for

windscreen defrosting and demisting systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 i of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical

units intended therefor (OJ L 196, 28.7.2010, p. 5).

19 Commission Regulation (EU) No 1008/2010 i of 9 November 2010 concerning type-approval requirements

for windscreen wiper and washer systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 i of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units

intended therefor (OJ L 292, 10.11.2010, p. 2).

43A Spray Regulation (EC) X X X X X X X X

suppression No 661/2009

systems Regulation (EU)

No 109/2011

44A Masses and Regulation (EC) X

dimensions No 661/2009

45A Safety glazing Regulation (EC) X X X X X X X X X X X

materials and No 661/2009 their installation

on vehicles UNECE Regulation No 43

46 Tyres Directive X X X X X X X X X X X 92/23/EEC 20

46A Installation of Regulation (EC) X X X X X X X X X X

tyres No 661/2009

Commission Regulation (EU)

No 458/2011 21

46B Pneumatic tyres Regulation (EC) X X X X

for motor No 661/2009 X

vehicles and

their trailers UNECE Regulation (Class C1) No 30

46C Pneumatic tyres Regulation (EC) X X X X X X X X

for commercial No 661/2009 vehicles and

their trailers UNECE Regulation (Classes C2 and No 54

C3)

46D Tyre rolling Regulation (EC) X X X X X X X X X X X

sound No 661/2009 emissions,

adhesion on wet UNECE Regulation surfaces and No 117

rolling resistance (Classes C1, C2 and C3)

46E Temporary-use Regulation (EC) X( 9A ) X( 9A )

spare unit, run No 661/2009 X

flat tyres/system

and tyre UNECE Regulation pressure No 64

monitoring system

20 Council directive 92/23/EEC i of 31 March 1992 relating to tyres for motor vehicles and their trailers and to their fitting (OJ L 129, 14.5.1992, p. 95).

21 Commission Regulation (EU) No 458/2011 i of 12 May 2011 concerning type-approval requirements for

motor vehicles and their trailers with regard to the installation of their tyres and implementing Regulation (EC) No 661/2009 i of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical

units intended therefor (OJ L 124, 13.5.2011, p. 11).

47A Speed Regulation (EC) X X X X

limitation of No 661/2009 X

vehicles UNECE Regulation

No 89

48A Masses and Regulation (EC) X X X X X X X X X

dimensions No 661/2009

49A Commercial Regulation (EC) X X X

vehicles with No 661/2009 regard to their

external UNECE Regulation projections No 61

forward of the cab’s rear panel

50A Mechanical Regulation (EC) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X X X X X

coupling No 661/2009 components of

combinations of UNECE Regulation vehicles No 55

50B Close-coupling Regulation (EC) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X

device (CCD); No 661/2009 fitting of an

approved type UNECE Regulation of CCD No 102

51A Burning Regulation (EC) X

behaviour of No 661/2009 materials used

in the interior UNECE Regulation construction of No 118

certain categories of motor vehicles

52A M and M 2 3 Regulation (EC) X X

vehicles No 661/2009

UNECE Regulation No 107

52B Strength of the Regulation (EC) X X

superstructure No 661/2009 of large

passenger UNECE Regulation vehicles No 66

53A Protection of Regulation (EC) X( 11 )

occupants in the No 661/2009 event of a

frontal collision UNECE Regulation No 94

54A Protection of Regulation (EC) X( 12 ) X( 12 )

occupants in the No 661/2009 event of lateral

collision UNECE Regulation No 95

55 (empty)

56A Vehicles for the Regulation (EC) X( 13 ) X( 13 ) X( 13 ) X( 13 ) X( 13 13 ) X( ) X( 13 )

carriage of No 661/2009 dangerous

goods UNECE Regulation No 105

57A Front underrun Regulation (EC) X X

protective No 661/2009 X

devices

(FUPDs) and UNECE Regulation their No 93

installation; front underrun protection (FUP)

58 Pedestrian Regulation (EC) X X

protection No 78/2009 of the X

European Parliament and of

the Council 22

59 Recyclability Directive X X -

2005/64/EC of the European Parliament and of the Council 23

60 (empty)

61 Air Directive X X( 14 )

conditioning 2006/40/EC of the systems European Parliament and of

the Council 24

62 Hydrogen Regulation (EC) X X X X X X

system No 79/2009

63 General Safety Regulation (EC) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 15 ) X( ) X( 15 )

No 661/2009

22 Regulation (EC) No 78/2009 i of the European Parliament and of the Council of 14 January 2009 on the

type-approval of motor vehicles with regard to the protection of pedestrians and other vulnerable road users, amending Directive 2007/46/EC i and repealing Directives 2003/102/EC i and 2005/66/EC (OJ L 035, 4.2.2009, p.1).

23 Directive 2005/64/EC i of the European Parliament and of the Council of 26 October 2005 on the typeapproval

of motor vehicles with regard to their reusability, recyclability and recoverability and amending Council Directive 70/156/EEC i (OJ L 310, 25.11.2005, p. 10).

24 Directive 2006/40/EC i of the European Parliament and of the Council of 17 May 2006 relating to emissions from air conditioning systems in motor vehicles and amending Council Directive 70/156/EEC i (OJ L 161, 14.6.2006, p. 12).

64 Gear shift Regulation (EC) X

indicators No 661/2009

65 Advanced Regulation (EC) X X X X

emergency No 661/2009

braking system Commission

Regulation (EU)

No 347/2012 25

66 Lane departure Regulation (EC) X X X X

warning system No 661/2009

Commission Regulation (EU)

No 351/2012 26

67 Specific Regulation (EC) X X X X X X

components for No 661/2009 X

liquefied

petroleum gases UNECE Regulation (LPG) and their No 67

installation on motor vehicles

68 Vehicle alarm Regulation (EC) X X

systems (VAS) No 661/2009 X

UNECE Regulation No 97

69 Electric safety Regulation (EC) X X X X X X

No 661/2009

UNECE Regulation No 100

70 Specific Regulation (EC) X X X X X X

components for No 661/2009 X

CNG and their

installation on UNECE Regulation motor vehicles No 110

71 Cab strength Regulation (EC) X X X

No 661/2009

UNECE Regulation No 29

25 Commission Regulation (EU) No 347/2012 i of 16 April 2012 implementing Regulation (EC) No 661/2009 i of the European Parliament and of the Council with respect to type-approval requirements for certain categories of motor vehicles with regard to advanced emergency braking systems (OJ L 109, 21.4.2012, p. 1).

26 Commission Regulation (EU) No 351/2012 i of 23 April 2012 implementing Regulation (EC) No 661/2009 i of the European Parliament and of the Council as regards type-approval requirements for the installation of lane departure warning systems in motor vehicles (OJ L 110, 24.4.2012, p. 18).

Explanatory notes

X Relevant regulatory act.

( 1 ) For vehicles with a reference mass not exceeding 2 610 kg. At the manufacturer’s request, Regulation (EC) No 715/2007 i may apply to vehicles with a reference mass not exceeding 2 840 kg.

( 2 ) In case of vehicles equipped with a LPG or CNG installation, a vehicle type-approval in accordance with UNECE Regulation No 67 or UNECE Regulation No 110 is required.

( 3 ) The fitting of an electronic stability control (‘ESC’) system is required in accordance with Article 12 and Article 13 of Regulation (EC) No 661/2009 i.

( 4 ) The fitting of an ESC system is required in accordance with Article 12 and Article 13 of Regulation (EC) No 661/2009 i.

( 4A ) If fitted, the protective device shall fulfil the requirements of UNECE Regulation No 18.

( 4B ) This Regulation applies to seats not falling within the scope of UNECE Regulation No 80.

( 9 ) For vehicles with a reference mass exceeding 2 610 kg which are not type-approved (at the manufacturer’s request and provided their reference mass does not exceed 2 840 kg) under Regulation (EC) No 715/2007 i.

( 9A ) Applies only where such vehicles are fitted with equipment covered by UNECE Regulation No 64. Tyre pressure monitoring system for M1 vehicles applies on a compulsory basis in accordance with Article 9(2) of Regulation (EC) No 661/2009 i.

( 10 ) Applies only to vehicles equipped with coupling(s).

( 11 ) Applies to vehicles with a technically permissible maximum laden mass not exceeding 2,5 tonnes.

( 12 ) Only applicable to vehicles where the ‘Seating Reference Point (“R” point)’ of the lowest seat is not more than

700 mm above the ground level.

( 13 ) Applies only when the manufacturer applies for type-approval of vehicles intended for the transport of dangerous goods.

( 14 ) Applies only for vehicles of category N 1 , class I as described in Annex I to Regulation (EC) No 715/2007 i.

( 15 ) Compliance with Regulation (EC) No 661/2009 i is mandatory, however, type-approval under this item number

is not foreseen as it represents the collection of individual items 3A, 3B, 4A, 5A, 6A, 6B, 7A, 8A, 9A, 9B, 10A, 12A, 13A, 13B, 14A, 15A, 15B, 16A, 17A, 17B, 18A, 19A, 20A, 21A, 22A, 22B, 22C, 23A, 24A, 25A, 25B, 25C, 25D, 25E, 25F, 26A, 27A, 28A, 29A, 30A, 31A, 32A, 33A, 34A, 35A, 36A, 37A, 38A, 42A, 43A,

44A, 45A, 46A, 46B, 46C, 46D, 46E, 47A, 48A, 49A, 50A, 50B, 51A, 52A, 52B, 53A, 54A, 56A, 57A and 64 to 71. The series of amendments of the UNECE regulations which apply on a compulsory basis are listed in Annex IV to Regulation (EC) No 661/2009 i. The series of amendments adopted subsequently are accepted as

an alternative.

Appendix 1

Regulatory acts for EU type-approval of vehicles produced in small series pursuant to Article 39

Table 1

M 1 vehicles

Item Subject Regulatory act Specific issues Applicability and specific requirements

1 Sound level Directive A 70/157/EEC

1A Sound level Regulation (EU) A No 540/2014 i

2 Emissions (Euro 5 Regulation (EC) A and 6) light duty No 715/2007

vehicles/access to (a) On-board The vehicle shall be fitted with an OBD information diagnostic system that fulfils the requirements of (OBD) Article 4(1) and (2) of Regulation (EC) No 692/2008 i (The OBD system shall be designed to record at least the malfunction of the engine management system).

The OBD-interface shall be able to communicate with commonly available diagnostic tools.

(b) In service N/A

conformity

(c) Access to It is sufficient that the manufacturer information provide access to repair and maintenance information in a readily accessible and prompt manner.

(d) Power (When the vehicle manufacturer uses an measurement engine from another manufacturer)

Bench test data from the engine

manufacturer are accepted provided that

the engine management system is identical

(i.e. having at least the same electronic

control unit (ECU)).

Power output test may be performed on a chassis dynamometer. It shall be taken into account of the power loss in the transmission.

Item Subject Regulatory act Specific issues Applicability and specific requirements

3A Prevention of fire Regulation (EC) (a) Liquid fuel B risks (liquid fuel No 661/2009 tanks

tanks) UNECE Regulation

No 34 (b) Installation in B vehicle

3B Rear underrun Regulation (EC) B protective devices No 661/2009

(RUPDs) and their

installation; rear UNECE Regulation underrun protection No 58

(RUP)

4A Space for mounting Regulation (EC) B and fixing rear No 661/2009

registration plates Regulation (EU)

No 1003/2010

5A Steering equipment Regulation (EC) C No 661/2009 i

UNECE Regulation (a) Mechanical The provisions of paragraph 5 of No 79 systems UNECE Regulation No 79 shall apply.

All tests prescribed in paragraph 6.2 of UNECE Regulation No 79 shall be performed and the requirements of paragraph 6.1 of UNECE Regulation No 79 shall apply.

(b) Complex All the requirements of Annex 6 of electronic UNECE Regulation No 79 shall apply.

vehicle control

system Compliance with these requirements may only be checked by a technical

service.

6A Door latches and Regulation (EC) C door retention No 661/2009

components UNECE Regulation (a) General All the requirements shall apply.

No 11 requirements (Paragraph 5

of UNECE Regulation No 11)

(b) Performance Only the requirements of requirements paragraph 6.1.5.4 and paragraph 6.3 of

(Paragraph 6 UNECE Regulation No 11 shall apply. of UNECE Regulation No 11)

7A Audible warning Regulation (EC) (a) Components X devices and signals No 661/2009

UNECE Regulation (b) Installation on B No 28 vehicle

Item Subject Regulatory act Specific issues Applicability and specific requirements

8A Devices for indirect Regulation (EC) (a) Components X

vision and their No 661/2009

installation UNECE Regulation B (b) Installation on

No 46 vehicle

9B Braking Regulation (EC) A

No 661/2009 (a) Design and tests

UNECE Regulation requirements

No 13-H (b) Electronic The fitting of BAS and ESC shall not be

stability required. If fitted, they shall comply with control (ESC) the requirements of UNECE Regulation and brake No 13-H.

assist systems(BAS)

10A Electromagnetic Regulation (EC) B compatibility No 661/2009

UNECE Regulation No 10

12A Interior fittings Regulation (EC) C No 661/2009 i

UNECE Regulation (a) Interior No 21 arrangement

(i) Radii and The requirements of paragraphs 5.1 to protrusion 5.6 of UNECE Regulation No 21 may be requirements waived at the request of the for switches, manufacturer.

pull-knobs and

the like, The requirements of paragraph 5.2 of controls and UNECE Regulation No 21 with the general interior exception of paragraphs 5.2.3.1, 5.2.3.2 fittings and 5.2.4 of that Regulation shall apply.

(ii) Energy Energy absorption tests on the upper absorption dashboard shall only be performed when tests on the the vehicle is not fitted with at least two upper front airbags or two static four-point dashboard harnesses.

(iii) Energy N/A absorption test

on the rear part of the seats

(b) Power All requirements of paragraph 5.8 of operation of UNECE Regulation No 21 shall apply.

windows, roofpanel systems and partition systems

Item Subject Regulatory act Specific issues Applicability and specific requirements

13A Protection of motor Regulation (EC) A vehicles against No 661/2009

unauthorised use The provisions of paragraph 8.3.1.1.1. of UNECE Regulation UNECE Regulation No 116 may be

No 116 applied instead of paragraph 8.3.1.1.2. of that Regulation regardless of the type of powertrain

14A Protection of the Regulation (EC) C

driver against the No 661/2009

steering mechanism Tests are required when the vehicle has

in the event of impact UNECE Regulation not been tested under UNECE No 12 Regulation No 94 (see item 53A)

15A Seats, their Regulation (EC) C anchorages and any No 661/2009

head restraints UNECE Regulation (a) General Requirements of paragraph 5.2 of

No 17 requirements UNECE Regulation No 17 shall apply with the exception of paragraph 5.2.3 of

(i) Specifications that Regulation.

(ii) Strength tests The requirements of paragraph 6.2 for seat UNECE Regulation No 17 shall apply.

backrest and head restraints

(iii) Unlocking The test shall be performed in and adjustment accordance with the requirements of tests Annex 7 to UNECE Regulation No 17.

(b) Head Requirements of paragraphs 5.4, 5.5, restraints 5.6, 5.10, 5.11 and 5.12 of UNECE Regulation No 17 shall apply with the

(i) Specifications exception of paragraph 5.5.2 of that

Regulation.

(ii) Strength tests The test prescribed in paragraph 6.4 of on head UNECE Regulation No 17 shall be restraints performed.

(c) Special The requirements of Annex 9 to UNECE requirements Regulation No 26 may be waived at the regarding the request of the manufacturer.

protection of occupants from displaced luggage

16A External projections Regulation (EC) C No 661/2009 i

UNECE Regulation (a) General The requirements of paragraph 5 of No 26 specifications UNECE Regulation No 26 shall apply.

(b) Particular The requirements of paragraph 6 of specifications UNECE Regulation No 26 shall apply.

Item Subject Regulatory act Specific issues Applicability and specific requirements

17A Vehicle access and Regulation (EC) D manoeuvrability No 661/2009

17B Speedometer Regulation (EC) B equipment including No 661/2009

its installation UNECE Regulation

No 39

18A Manufacturer’s Regulation (EC) B statutory plate and No 661/2009

vehicle identification

number Regulation (EU) No 19/2011 i

19A Safety-belt Regulation (EC) B anchorages, Isofix No 661/2009

anchorages systems

and Isofix top tether UNECE Regulation anchorages No 14

20A Installation of Regulation (EC) B lighting and light No 661/2009

signalling devices on Daytime Running Lights (DRL) shall be

vehicles UNECE Regulation fitted to a new type of vehicle. No 48

21A Retro-reflecting Regulation (EC) X devices for power No 661/2009

driven vehicles and

their trailers UNECE Regulation No 3

22A Front and rear Regulation (EC) X position lamps, stop No 661/2009

lamps and endoutline

marker lamps UNECE Regulation for motor vehicles No 7

and their trailers

22B Daytime running Regulation (EC) X lamps for power No 661/2009

driven vehicles UNECE Regulation

No 87

22C Side-marker lamps Regulation (EC) X for motor vehicles No 661/2009

and their trailers UNECE Regulation

No 91

23A Direction indicators Regulation (EC) X for power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 6

Item Subject Regulatory act Specific issues Applicability and specific requirements

24A Illumination of rear Regulation (EC) X registration plates of No 661/2009

power-driven

vehicles and their UNECE Regulation trailers No 4

25A Power-driven Regulation (EC) X vehicle’s sealed No 661/2009

beam headlamps

(SB) emitting an UNECE Regulation European No 31

asymmetrical passing beam or a driving beam or both

25B Filament lamps for Regulation (EC) X use in approved lamp No 661/2009

units of power-driven

vehicles and their UNECE Regulation trailers No 37

25C Motor vehicle Regulation (EC) X headlamps equipped No 661/2009

with gas-discharge

light sources UNECE Regulation No 98

25D Gas-discharge light Regulation (EC) X sources for use in No 661/2009

approved gasdischarge

lamp units UNECE Regulation of power-driven No 99

vehicles

25E Motor vehicle Regulation (EC) X headlamps emitting No 661/2009

an asymmetrical

passing beam or a UNECE Regulation driving beam or both No 112

and equipped with filament lamps and/or LED modules

25F Adaptive front Regulation (EC) X lighting systems No 661/2009

(AFS) for motor

vehicles UNECE Regulation No 123

26A Power-driven vehicle Regulation (EC) X front fog lamps No 661/2009

UNECE Regulation No 19

27A Towing device Regulation (EC) B No 661/2009 i

Item Subject Regulatory act Specific issues Applicability and specific requirements

29A Reversing lights for Regulation (EC) X power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 23

28A Rear fog lamps for Regulation (EC) X power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 38

30A Parking lamps for Regulation (EC) X power-driven No 661/2009

vehicles UNECE Regulation

No 77

31A Safety-belts, restraint Regulation (EC) (a) Components X systems, child No 661/2009

restraint systems and B

Isofix child restraint UNECE Regulation

(b) Installation requirements

systems No 16

32A Forward field of Regulation (EC) A vision No 661/2009

UNECE Regulation No 125

33A Location and Regulation (EC) A identification of hand No 661/2009

controls, tell-tales

and indicators UNECE Regulation No 121

34A Windscreen Regulation (EC) C defrosting and No 661/2009

demisting systems Regulation (EU) (a) Windscreen Only point 1.1.1 of Annex II to

No 672/2010 defrosting Regulation (EU) No 672/2010 i shall apply, provided that warm air flow is

ducted to the whole surface of the windscreen or the latter is electrically heated on its whole surface.

(b) Windscreen Only point 1.2.1 of Annex II to demisting Regulation (EU) No 672/2010 i shall apply, provided that warm air flow is

ducted to the whole surface of the windscreen or the latter is electrically heated on its whole surface.

Item Subject Regulatory act Specific issues Applicability and specific requirements

35A Windscreen wiper Regulation (EC) C and washer systems No 661/2009

Regulation (EU) (a) Windscreen Points 1.1 to 1.1.10 of Annex III to

No 1008/2010 wiper system Regulation (EU) No 1008/2010 i shall apply.

Only the test described in point 2.1.10 of Annex III to Regulation (EU) No 1008/2010 i shall be performed.

(b) Windscreen Point 1.2 of Annex III to Regulation washer system (EU) No 1008/2010 shall apply with the exception of points 1.2.2, 1.2.3 and 1.2.5.

36A Heating system Regulation (EC) C

No 661/2009 The fitting of a heating system shall not

UNECE Regulation be required. No 122 (a) All heating The requirements of paragraphs 5.3 and systems 6 of UNECE Regulation No 122 shall apply.

(b) LPG heating The requirements of Annex 8 to UNECE systems Regulation No 122 shall apply.

37A Wheel guards Regulation (EC) B No 661/2009 i

38A Head restraints Regulation (EC) X No 661/2009 i

UNECE Regulation No 25

41A Emissions (Euro VI) Regulation (EC) A heavy duty No 595/2009

vehicles/access to With the exception of the set of

information requirements relating to OBDs and access to information.

Power (When the vehicle manufacturer uses an measurement engine from another manufacturer)

Bench test data from the engine manufacturer are accepted, provided that the engine management system is identical (i.e. having at least the same ECU).

Power output test may be performed on a chassis dynamometer. It shall be taken into account of the power loss in the transmission.

Item Subject Regulatory act Specific issues Applicability and specific requirements

44A Masses and Regulation (EC) B

dimensions No 661/2009 The hill start test at maximum

Regulation (EU) combination mass described in point 5.1 No 1230/2012 of Part A of Annex I to Regulation (EU) No 1230/2012 i may be waived at the request of the manufacturer.

45A Safety glazing Regulation (EC) (a) Components X materials and their No 661/2009

installation on (b) Installation B

vehicles UNECE Regulation No 43

46 Tyres Directive 92/23/EEC i Components X

46A Installation of tyres Regulation (EC) B

No 661/2009 Dates for progressive application shall

Regulation (EU) be those set out in Article 13 of No 458/2011 Regulation (EC) No 661/2009 i.

46B Pneumatic tyres for Regulation (EC) Components X motor vehicles and No 661/2009

their trailers (Class UNECE Regulation C1) No 30

46D Tyre rolling sound Regulation (EC) Components X emissions, adhesion No 661/2009

on wet surfaces and

rolling resistance UNECE Regulation No 117

(classes C1, C2 and C3)

46E Temporary-use spare Regulation (EC) Components X unit, run-flat No 661/2009

tyres/system and tyre UNECE Regulation Fitting of a tyre B pressure monitoring No 64 pressure The fitting of a TPMS shall not be

system monitoring system (TPMS) required.

50A Mechanical coupling Regulation (EC) (a) Components X components of No 661/2009

combinations of UNECE Regulation (b) Installation B

vehicles No 55

53A Protection of Regulation (EC) C

occupants in the No 661/2009 The requirements of UNECE Regulation

event of a frontal

collision UNECE Regulation No 94 shall apply to vehicles fitted with No 94 front airbags. Vehicles not fitted with

airbags shall fulfil the requirement of item 14A of this table.

Item Subject Regulatory act Specific issues Applicability and specific requirements

54A Protection of Regulation (EC) C occupants in the No 661/2009

event of lateral Head form test The manufacturer shall supply the

collision UNECE Regulation technical service with suitable No 95 information concerning a possible

impact of the head of the dummy against the structure of the vehicle or the side glazing if made up of laminated glazing.

When it is proven that such impact is likely to happen, the partial test using the head form test described in paragraph 3.1 of Annex 8 to UNECE Regulation No 95 shall be conducted and the criterion specified in paragraph 5.2.1.1 of UNECE Regulation No 95 shall be met.

In agreement with the technical service, the test procedure described in Annex 4 to UNECE Regulation No 21 may be used as an alternative to the test of UNECE Regulation No 95.

58 Pedestrian protection Regulation (EC) (a) Technical N/A No 78/2009 requirements

applicable to vehicle

(b) Frontal X

protection

systems

59 Recyclability Directive 2005/64/EC i N/A - Only Article 7 on reuse of component parts shall apply.

61 Air-conditioning Directive 2006/40/EC i A

systems Fluorinated greenhouse gases with a

global warming potential higher than 150 are permitted until 31 December 2016.

62 Hydrogen system Regulation (EC) X No 79/2009 i

63 General Safety Regulation (EC) See explanatory note ( 15 ) of the table in No 661/2009 Part I of Annex IV with regulatory acts for EU type-approval of vehicles produced in unlimited series.

64 Gear shift indicators Regulation (EC) N/A No 661/2009

Item Subject Regulatory act Specific issues Applicability and specific requirements

67 Specific components Regulation (EC) (a) Components X for liquefied No 661/2009

petroleum gases

(LPG) and their UNECE Regulation

(b) Installation A

installation on motor No 67

vehicles

68 Vehicle alarm Regulation (EC) (a) Components X systems (VAS) No 661/2009

UNECE Regulation (b) Installation B

No 97

69 Electric safety Regulation (EC) B No 661/2009 i

UNECE Regulation No 100

70 Specific components Regulation (EC) (a) Components X for CNG and their No 661/2009

installation on motor

vehicles UNECE Regulation

(b) Installation A

No 110

Explanatory notes

X Full application of the regulatory act as follows:

(a) a type-approval certificate shall be issued;

(b) tests and checks shall be conducted by the technical service or the manufacturer under the conditions laid down in Articles 71 to 85;

(d) Conformity of Production (COP) shall be ensured.

A Application of the regulatory act as follows:

(a) all requirements of the regulatory act shall be fulfilled unless otherwise stated;

(b) no type-approval certificate shall be required;

(c) tests and checks shall be conducted by the technical service or the manufacturer under the conditions laid down in Articles 71 to 85;

(d) a test report shall be drafted in accordance with the provisions of Annex V;

(e) COP shall be ensured.

B Application of the regulatory act as follows:

Same as for letter ‘A’ with the exception that the tests and checks may be performed by the manufacturer himself, subject to the agreement of the approval authority.

C Application of the regulatory act as follows:

(a) only the technical requirements from the regulatory shall be fulfilled, irrespective of any transitional provision;

(b) no type-approval certificate shall be required;

(d) a test report shall be drafted in accordance with the provisions of Annex V;

(e) COP shall be ensured.

D Same as for decisions in letters ‘B’ and ‘C’, with the exception that a statement of compliance submitted by the manufacturer is sufficient. No test report shall be required.

The approval authority or technical service may require additional information of further evidence, if need be.

N/A The regulatory act shall not apply. Compliance with one or more specific aspects included in the regulatory act may however be imposed.

The series of amendments of the UNECE Regulations to be used are listed in Annex IV to Regulation

(EC) No 661/2009. The series of amendments adopted subsequently are accepted as an alternative.

Table 2

N 1 vehicles 27

Item Subject Regulatory act Specific issues Applicability and specific requirements

1A Sound level Regulation (EU) A No 540/2014 i

2 Emissions (Euro 5 Regulation (EC) A and 6) light duty No 715/2007

vehicles/access to (a) OBD The vehicle shall be fitted with an OBD information system that fulfils the requirements of

Article 4(1) and (2) of Regulation (EC) No 692/2008 i (the OBD system shall be designed to record at least the malfunction of the engine management system).

The OBD-interface shall be able to communicate with commonly available diagnostic tools.

(b) In service N/A

conformity

(c) Access to It is sufficient that the manufacturer information provides access to vehicle repair and maintenance information in a readily accessible and prompt manner.

(d) Power (When the vehicle manufacturer uses an measurement engine from another manufacturer)

Bench test data from the engine

manufacturer are accepted provided that

the engine management system is identical

(i.e. having at least the same ECU).

Power output test may be performed on a chassis dynamometer. It shall be taken into account of the power loss in the transmission.

3A Prevention of fire Regulation (EC) (a) Liquid fuel B risks (liquid fuel No 661/2009 tanks

tanks) UNECE Regulation (b) Installation in B

No 34 vehicle

3B Rear underrun Regulation (EC) B protective devices No 661/2009

(RUPDs) and their

installation; rear UNECE Regulation underrun protection No 58

(RUP)

4A Space for mounting Regulation (EC) B and fixing rear No 661/2009

registration plates Regulation (EU)

No 1003/2010

27 The explanatory notes relating to Part I of Annex IV also apply to Table 2. The letters in table 2 have

the same meaning as in Table 1.

Item Subject Regulatory act Specific issues Applicability and specific requirements

5A Steering equipment Regulation (EC) C

No 661/2009

UNECE Regulation (a) Mechanical The provisions of paragraph 5 of

No 79 systems UNECE Regulation No 79.01 shall apply.

All tests prescribed in paragraph 6.2 of UNECE Regulation No 79 shall be performed and the requirements of paragraph 6.1 of UNECE Regulation No 79 shall apply.

(b) Complex All the requirements of Annex 6 of electronic UNECE Regulation No 79 shall apply.

vehicle control

system Compliance with these requirements may only be checked by a technical

service.

6A Door latches and door Regulation (EC) C retention components No 661/2009

UNECE Regulation (a) General All requirements shall apply.

No 11 requirements (Paragraph 5

of UNECE Regulation No 11)

(b) Performance Only the requirements of requirements paragraph 6.1.5.4 and paragraph 6.3 of

(Paragraph 6 UNECE Regulation No 11 shall apply. of UNECE Regulation No 11)

7A Audible warning Regulation (EC) (a) Components X devices and signals No 661/2009

UNECE Regulation (b) Installation on B No 28 vehicle

8A Devices for indirect Regulation (EC) (a) Components X vision and their No 661/2009

installation UNECE Regulation (b) Installation on B

No 46 vehicle

9A Braking of vehicles Regulation (EC) (a) design and test A and trailers No 661/2009 requirements

UNECE Regulation

No 13. (b) ESC The fitting of ESC shall not be required. If fitted, it shall comply with the

requirements of UNECE Regulation No 13.

Item Subject Regulatory act Specific issues Applicability and specific requirements

9B Braking of passenger Regulation (EC) (a) Design and A cars No 661/2009 test

UNECE Regulation requirements

No 13-H (b) Electronic The fitting of BAS and ESC shall not be

stability required. If fitted, they shall comply with control (ESC) the requirements of UNECE Regulation and brake No 13-H. assist systems(BAS)

10A Electromagnetic Regulation (EC) B compatibility No 661/2009

UNECE Regulation No 10

13A Protection of motor Regulation (EC) A vehicles against No 661/2009 The provisions of paragraph 8.3.1.1.1. of

unauthorised use UNECE Regulation UNECE Regulation No 116 may be

No 116 applied instead of paragraph 8.3.1.1.2. of that Regulation regardless of the type of

powertrain

14A Protection of the Regulation (EC) C driver against the No 661/2009

steering mechanism in

the event of impact UNECE Regulation

(a) Barrier impact A test shall be required.

No 12 test

(b) Body block Not required if the steering wheel is impact test fitted with an airbag.

against steering wheel

15A Seats, their Regulation (EC) B anchorages and any No 661/2009

head restraints UNECE Regulation

No 17

17A Vehicle access and Regulation (EC) D manoeuvrability No 661/2009

17B Speedometer Regulation (EC) B equipment including No 661/2009

its installation UNECE Regulation

No 39

18A Manufacturer’s Regulation (EC) B statutory plate and No 661/2009

vehicle identification

number Regulation (EU) No 19/2011 i

Item Subject Regulatory act Specific issues Applicability and specific requirements

19A Safety-belt

anchorages, Isofix Regulation (EC) B anchorages systems No 661/2009

and Isofix top tether

anchorages UNECE Regulation No 14

20A Installation of lighting

and light-signalling Regulation (EC) B devices on motor No 661/2009

vehicles DRLs shall be fitted to a new type of UNECE Regulation vehicle.

No 48

21A Retro-reflecting

devices for power Regulation (EC) X driven vehicles and No 661/2009

their trailers UNECE Regulation

No 3

22A Front and rear

position lamps, stop Regulation (EC) X lamps and end-outline No 661/2009

marker lamps for

motor vehicles and UNECE Regulation their trailers No 7

22B Daytime running Regulation (EC) X

lamps for power No 661/2009

driven vehicles UNECE Regulation

No 87

22C Side-marker lamps for Regulation (EC) X motor vehicles and No 661/2009

their trailers UNECE Regulation

No 91

23A Direction indicators Regulation (EC) X for power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 6

24A Illumination of rear Regulation (EC) X

registration plates of No 661/2009

power-driven vehicles

and their trailers UNECE Regulation No 4

25A Power-driven Regulation (EC) X

vehicle’s sealed-beam No 661/2009

headlamps (SB)

emitting an European UNECE Regulation asymmetrical passing No 31

beam or a driving beam or both

Item Subject Regulatory act Specific issues Applicability and specific requirements

25B Filament lamps for use Regulation (EC) X in approved lamp units No 661/2009

of power-driven vehicles

and their trailers UNECE Regulation No 37

25C Motor vehicle headlamps Regulation (EC) X equipped with gas No 661/2009

discharge light sources UNECE Regulation

No 98

25D Gas-discharge light Regulation (EC) X sources for use in No 661/2009

approved gas-discharge

lamp units of power UNECE Regulation driven vehicles No 99

25E Motor vehicle headlamps Regulation (EC) X emitting an asymmetrical No 661/2009

passing beam or a

driving beam or both and UNECE Regulation equipped with filament No 112

lamps and/or LED modules

25F Adaptive front-lighting Regulation (EC) X systems (AFS) for motor No 661/2009

vehicles UNECE Regulation

No 123

26A Power-driven vehicle Regulation (EC) X front fog lamps No 661/2009

UNECE Regulation No 19

27A Towing device Regulation (EC) B

No 661/2009

28A Rear fog lamps for Regulation (EC) X power-driven vehicles No 661/2009

and their trailers UNECE Regulation

No 38

29A Reversing lights for Regulation (EC) X power-driven vehicles No 661/2009

and their trailers UNECE Regulation

No 23

30A Parking lamps for Regulation (EC) X power-driven vehicles No 661/2009

UNECE Regulation No 77

Item Subject Regulatory act Specific issues Applicability and specific requirements

31A Safety-belts, restraint Regulation (EC) (a) Components X systems, child No 661/2009

restraint systems and (b) Installation B

Isofix child restraint UNECE Regulation systems No 16

requirements

33A Location and Regulation (EC) A identification of hand No 661/2009

controls, tell-tales and

indicators UNECE Regulation No 121

34A Windscreen defrosting Regulation (EC) N/A

and demisting systems No 661/2009 The vehicle shall be fitted with a suitable

Regulation (EU) windscreen defrosting and demisting No 672/2010 system.

35A Windscreen wiper and Regulation (EC) N/A

washer systems No 661/2009 The vehicle shall be fitted with a suitable

Regulation (EU) windscreen wiper and washer system. No 1008/2010

36A Heating system Regulation (EC) C

No 661/2009 The fitting of a heating system shall not

UNECE Regulation be required. No 122 (a) All heating The requirements of paragraphs 5.3 and systems 6 of UNECE Regulation No 122 shall apply.

(b) LPG heating The requirements of Annex 8 to UNECE systems Regulation No 122 shall apply.

41A Emissions (Euro VI) Regulation (EC) A heavy duty No 595/2009

vehicles/access to With the exception of the set of

information requirements relating to OBDs and access to information.

Power (When the vehicle manufacturer uses an measurement engine from another manufacturer)

Bench test data from the engine

manufacturer are accepted provided that

the engine management system is

identical (i.e. having at least the same

ECU).

Power output test may be performed on a chassis dynamometer. It shall be taken into account of the power loss in the transmission.

43A Spray suppression Regulation (EC) B systems No 661/2009

Regulation (EU) 458/2011 i.

Item Subject Regulatory act Specific issues Applicability and specific requirements

45A Safety glazing Regulation (EC) (a) Components X materials and their No 661/2009

installation on

vehicles UNECE Regulation (b) Installation B

No 43

46 Tyres Directive 92/23/EEC i Components X

46A Installation of tyres Regulation (EC) B No 661/2009 i

Dates for progressive application shall Regulation (EU) be those set out in Article 13 of

No 458/2011 Regulation (EC) No 661/2009 i.

46B Pneumatic tyres for Regulation (EC) Components X motor vehicles and No 661/2009

their trailers (Class C1) UNECE Regulation No 30

46C Pneumatic tyres for Regulation (EC) Components X commercial vehicles No 661/2009

and their trailers (Classes C2 and C3) UNECE Regulation No 54

46D Tyre rolling sound Regulation (EC) Components X emissions, adhesion No 661/2009

on wet surfaces and rolling resistance UNECE Regulation (Classes C1, C2 and No 117 C3)

46E Temporary-use spare Regulation (EC) Components X unit, run-flat No 661/2009

tyres/system and tyre Fitting of a B

pressure monitoring UNECE Regulation tyre-pressure system No 64 monitoring

The fitting of a TPMS shall not be

system required

48A Masses and Regulation (EC) B dimensions No 661/2009

Regulation (EU) Hill start test at The hill start test at maximum

No 1230/2012 maximum combination mass described in point 5.1 combination of Part A of Annex 1 to Regulation (EU)

mass No 1230/2012 may be waived at the request of the manufacturer.

Item Subject Regulatory act Specific issues Applicability and specific requirements

49A Commercial vehicles Regulation (EC) C with regards to their No 661/2009

external projections

forward of the cab’s UNECE Regulation

(a) General The requirements of paragraph 5 of

rear panel No 61

specifications UNECE Regulation No 61 shall apply

(b) Particular The requirements of paragraph 6 of specifications UNECE Regulation No 61 shall apply.

50A Mechanical coupling Regulation (EC) (a) Components X components of No 661/2009

combinations of B

vehicles UNECE Regulation

(b) Installation

No 55

54A Protection of Regulation (EC) C C occupants in the event No 661/2009

of lateral collision UNECE Regulation Head form test The manufacturer shall supply the

No 95 technical service with suitable information concerning a possible

impact of the head of the dummy against the structure of the vehicle or the side glazing, if made up of laminated glazing.

When such impact is proven likely to happen, then the partial test using the head form test described in paragraph 3.1 of Annex 8 to UNECE Regulation No 95 shall be conducted and the criterion specified in paragraph 5.2.1.1 of UNECE Regulation No 95 shall be met.

In agreement with the technical service, the test procedure described in Annex 4 to UNECE Regulation No 21 may be used as an alternative to the test of UNECE Regulation No 95 mentioned above.

56 Vehicles for the Regulation (EC) A carriage of dangerous No 661/2009

goods UNECE Regulation

No 105

58 Pedestrian protection Regulation (EC) (a) Technical N/A

No 78/2009 requirements applicable to a vehicle

(b) Frontal X

protection

systems

59 Recyclability Directive 2005/64/EC i N/A

Only Article 7 on reuse of component parts shall apply.

Item Subject Regulatory act Specific issues Applicability and specific requirements

61 Air-conditioning Directive 2006/40/EC i B

systems Fluorinated greenhouse gases with a

global warming potential higher than 150 are permitted until 31 December 2016.

62 Hydrogen system Regulation (EC) X

No 79/2009

63 General Safety Regulation (EC) See explanatory note ( 15 ) of the table in

No 661/2009 Part I of Annex IV with regulatory acts for EU type-approval of vehicles produced in unlimited series.

67 Specific components Regulation (EC) (a) Components X for liquefied No 661/2009

petroleum gases (b) Installation A

(LPG) and their UNECE Regulation installation on motor No 67

vehicles

68 Vehicle alarm systems Regulation (EC) (a) Components X

(VAS) No 661/2009

UNECE Regulation (b) Installation B

No 97

69 Electric safety Regulation (EC) B

No 661/2009

UNECE Regulation No 100

70 Specific components Regulation (EC) (a) Components X for CNG and their No 661/2009

installation on motor (b) Installation A

vehicles UNECE Regulation No 110

71 Cab strength Regulation (EC) C

No 661/2009

UNECE Regulation No 29

Appendix 2

Requirements for EU individual vehicle approval pursuant to Article 42

1.

APPLICATION

For the purpose of application of this appendix, a vehicle is deemed to be new where:

(a) it has never been registered previously; or

(b) it has been registered for less than 6 months at the time of the application for individual vehicle approval.

A vehicle shall be considered registered where it has obtained a permanent, temporary or short-term administrative authorisation for entry into service in road traffic, involving

its identification and the issuing of a registration number ( 1 ).

1.

ADMINISTRATIVE PROVISIONS

1.1. Categorisation of the vehicle

Vehicles shall be categorised according to the criteria set out in Annex II as follows:

(a) the actual number of seating positions shall be taken into consideration; and

(b) the technically maximum permissible laden mass shall be the maximum mass stated by the manufacturer in the country of origin and available in his official documentation.

Where it is not possible to easily determine the vehicle category because of the design of the bodywork, the conditions set out in Annex II shall apply.

1.2. Application for individual vehicle approval

(a) The applicant shall submit an application to the approval authority accompanied by all relevant documentation necessary for the operation of the approval procedure.

Where the submitted documentation is incomplete, falsified or forged the application for approval shall be rejected.

(b) Only one application for a particular vehicle may be submitted in only one Member State. The approval authority may require from the applicant a written commitment that only one application will be submitted in the Member State of the approval authority.

By a particular vehicle, it shall be understood a physical vehicle the vehicle identification number of which is clearly identified.

However, any applicant may apply for EU individual vehicle approval in another Member State in respect of another particular vehicle with technical characteristics identical or similar to the one that has been granted an EU individual vehicle approval.

___________________________________

( 1 ) In the absence of a registration document, the competent authority may refer to available documented

evidence of date of manufacture or documented evidence of first purchase.

The particulars of the vehicle requested may only consist in an appropriate selection of the information included in Annex I.

(d) The technical requirements to be complied with are those laid down in section 4.

The technical requirements shall be those applicable to new vehicles belonging to a type of vehicle currently in production, in relation to the date of the submission of the application.

(e) With respect to the tests required in the regulatory acts listed in this Annex, the applicant shall supply a statement of compliance with recognised international standards or regulations. The statement in question may only be issued by the vehicle manufacturer.

‘Statement of compliance’ shall mean a statement issued by the office or

department within the manufacturer’s organisation that is duly authorised by the

management to fully engage the legal responsibility of the manufacturer with

respect to the design and the construction of a vehicle.

The regulatory acts for which such a statement has to be supplied shall be those referred to in section 4.

Where a statement of compliance gives rise to uncertainty, the applicant may be required to obtain from the manufacturer a piece of evidence, including a test report, in order to corroborate the manufacturer’s statement.

1.3. Technical services entrusted with individual vehicle approvals

(a) The technical services entrusted with individual vehicle approvals shall be of category A as referred to in Article 72(1).

(b) By way of derogation from the requirement to demonstrate their compliance with the standards listed in Appendix 1 to Annex V, technical services shall comply with the following standards:

(i) EN ISO/IEC 17025:2005 when they perform tests themselves;

(ii) EN ISO/IEC 17020:2012 when they check compliance of the vehicle with the requirements included in this Appendix.

(c) Where specific tests requiring specific skills have to be conducted at the request of the applicant, they shall be conducted by one of the technical services notified to the Commission at the choice of the applicant.

1.4. Test reports

(a) Test reports shall be drafted in accordance with paragraph 5.10.2 of Standard EN ISO/IEC 17025:2005.

(b) Test reports shall be drafted in one of the languages of the Union determined by the approval authority.

Where in application of point 1.3(c) a test report has been issued in a Member State other than the one entrusted with the individual vehicle approval, the approval authority may require that the applicant submits a true translation of the test report.

(c) Test reports shall include a description of the vehicle tested, including its identification. The parts that play a significant role with regard to the results of the tests shall be described and their identification number reported.

(d) At the request of an applicant, a test report delivered for a system related to a particular vehicle may be presented repeatedly either by the same or another applicant for the purposes of individual approval of another vehicle.

In such a case, the approval authority shall ensure that the technical characteristics of the vehicle are properly inspected against the test report.

Inspection of the vehicle and the documentation accompanying the test report shall demonstrate that the vehicle for which an individual approval is sought has the same characteristics as the vehicle described in the report.

(e) Only authenticated copies of a test report may be submitted.

(f) Test reports referred to in point 1.4(d) do not include the reports drawn up in order to grant the individual vehicle approval.

1.5. In the individual vehicle approval procedure each particular vehicle shall be inspected physically by the technical service.

No exemption to this principle shall be permitted.

1.6. Where the approval authority is satisfied that the vehicle meets the technical requirements specified in this Appendix and conforms to the description included in the application, it shall grant approval in accordance with Article 42.

1.7. The certificate of approval shall be drafted according to Model D as laid down in Annex VI.

1.8. The approval authority shall keep record of all approvals granted under Article 42.

2.

REVIEW OF THE TECHNICAL REQUIREMENTS
The list of the technical requirements included in section 3 shall be regularly reviewed in order to take account of the results of the harmonisation work in progress at the World Forum for Harmonization of Vehicle Regulations (WP.29) in Geneva and legislative developments in the third countries.

3.

TECHNICAL REQUIREMENTS

Part I: Vehicles belonging to category M 1

Item Regulatory act reference Alternative requirements

1 Council Directive Drive-by test

70/157/EEC 28 (a) A test shall be conducted in accordance with the ‘Method A’ (Permissible sound level) referred to in Annex 3 to UNECE Regulation No 51.

Limits are those specified in point 2.1 of Annex I to Directive 70/157/EEC i. 1 decibel in addition to the permitted limits shall be allowed.

(b) The test track shall comply with Annex 8 to UNECE Regulation No 51. A test track having different specifications may be used under the condition that correlation tests have been conducted by the technical service. A correction factor shall be applied if necessary.

(c) Exhaust systems containing fibrous materials need not be conditioned as prescribed in Annex 5 to UNECE Regulation No 51.

Stationary test

A test shall be conducted in accordance with paragraph 3.2 of Annex 3 to UNECE Regulation No 51.

2a Regulation (EC) Tailpipe emissions

No 715/2007

(Emissions Euro 5 and 6 (a) A type I test shall be conducted in accordance with Annex III to Regulation (EC) No 692/2008 i using the deterioration

light duty vehicles/access to factors set out in point 1.4 of Annex VII to Regulation (EC) information) No 692/2008. The limits to be applied shall be those

specified in Table I and Table II in Annex I to Regulation (EC) No 715/2007 i.

(b) The vehicle shall not be required to exhibit 3 000 km as mentioned in paragraph 3.1.1 of Annex 4 to UNECE Regulation No 83.

(c) The fuel to be used for the test shall be the reference fuel as prescribed in Annex IX to Regulation (EC) No 692/2008 i.

(d) The dynamometer shall be set up in accordance with the technical requirements set out in paragraph 3.2 of Annex 4 to UNECE Regulation No 83.

28 Council Directive of 6 February 1970 on the approximation of the laws of the Member States relating to

the permissible sound level and the exhaust system of motor vehicles (OJ L 42, 23.2.1970, p. 16).

(e) The test referred to in point (a) shall not be conducted where it can be shown that the vehicle complies with the California Code Regulations referred to in point 2.1.1 of Annex I to Regulation (EC) No 692/2008 i.

Evaporative emissions

For petrol-fuelled engines, the presence of an evaporate emissions control system shall be required (e.g. a charcoal canister).

Crankcase emissions

The presence of a device for recycling crankcase gases shall be required.

OBD

(a) The vehicle shall be fitted with an OBD system.

(b) OBD-interface must be able to communicate with common diagnostic tools used for periodic technical inspections.

Smoke opacity

(a) Vehicles equipped with a diesel-fuelled engine shall be tested in accordance with the tests methods referred to in Appendix 2 to Annex IV to Regulation (EC) No 692/2008 i.

(b) The corrected value of the absorption coefficient shall be affixed conspicuously and in a readily accessible place.

CO 2 emissions and fuel consumption

(a) A test shall be conducted in accordance with Annex XII to Regulation (EC) No 692/2008 i.

(b) The vehicle shall not be required to exhibit 3 000 km as requested in paragraph 3.1.1 of Annex 4 to UNECE Regulation No 83.

(c) Where the vehicle complies with the California Code Regulations referred to in point 2.1.1 of Annex I to Regulation (EC) No 692/2008 i and therefore no test of tailpipe emissions is required to be performed, Member States shall calculate CO 2 emissions and fuel consumption with the formula laid down in the explanatory notes ( b ) and ( c ).

Access to information

The provisions regarding access to information shall not apply.

Power measurement

(a) The applicant shall submit a statement from the manufacturer stating the maximum engine power output in kW as well as the corresponding engine speed in revolutions per minute.

(b) An engine power output curve providing the same information may alternatively be provided by the applicant.

3 UNECE Regulation No 34 Fuel tanks

(Fuel tanks — Rear (a) Fuel tanks shall comply with paragraph 5 of UNECE protective devices) Regulation No 34 with the exception of paragraphs 5.1, 5.2 and 5.12. In particular, they shall comply with paragraphs 5.9 and 5.9.1 but no dripping test shall be conducted.

(b) LPG or CNG tanks shall be type-approved in accordance with UNECE Regulation No 67, series of amendments 01, or Regulation No 110 ( a ), respectively.

Specific provisions for fuel tanks made of a plastic material

The applicant shall submit a statement from the manufacturer establishing that the fuel tank on the particular vehicle, the Vehicle Identification Number (VIN) of which has to be specified, complies either with at least one of the following:

— FMVSS No 301 (Fuel system integrity), or

— Annex 5 to UNECE Regulation 34.

Rear protective device

The rear part of the vehicle shall be constructed in accordance with paragraphs 8 and 9 of UNECE Regulation No 34.

3B UNECE Regulation No 58 The rear part of the vehicle shall be constructed in accordance with

(rear underrun protection) paragraph 2 UNECE Regulation No 58. It is sufficient that the requirements set out in paragraph 2.3 are fulfilled.

4 Regulation (EU) Space, inclination, angles for visibility and position of the

No 1003/2010 registration plate shall comply with Regulation (EU) No 1003/2010 i.

(Rear registration plate space)

5 UNECE Regulation No 79 Mechanical systems

(Steering effort) (a) The steering mechanism shall be built as to self-centre. In order to check compliance with this provision, a test shall be conducted in accordance with paragraphs 6.1.2 and 6.2.1 of UNECE Regulation No 79.

(b) The failure of the power steering equipment shall not lead to a complete loss of control of the vehicle.

Complex electronic vehicle control system (‘Drive-by wire’ devices)

Complex electronic control system shall be permitted only if they comply with Annex 6 to UNECE Regulation No 79.

6 UNECE Regulation No 11 Compliance with paragraph 6.1.5.4 of UNECE Regulation No 11.

(Door latches and hinges)

7 UNECE Regulation No 28 Components

(Audible warning) The audible warning devices are not required to be type-approved

in accordance with UNECE Regulation No 28. However, they shall emit a continuous sound as required in paragraph 6.1.1 of UNECE Regulation No 28.

Installation on vehicle

(a) A test shall be conducted in accordance with paragraph 6.2 of UNECE Regulation No 28.

(b) The maximum sound pressure level shall be in accordance

with paragraph 6.2.7.

8 UNECE Regulation No 46 Components

(Indirect vision devices) (a) The vehicle shall be fitted with the rear-view mirrors prescribed in paragraph 15.2 of UNECE Regulation No 46.

(b) They are not required to be type-approved in accordance with UNECE Regulation No 46.

(c) The radii of curvature of the mirrors shall not cause significant image distortions. At the discretion of the technical service, the radii of curvature shall be checked in accordance with the method described in Annex 7 to UNECE Regulation No 46. The radii of curvature shall not be less than those required by paragraph 6.1.2.2.4. of UNECE Regulation No 46.

Installation on vehicle

Measurement shall be conducted in order to ensure that the fields of vision comply either with paragraph 15.2.4. of UNECE Regulation No 46 or with section 5 of Annex III to Directive 71/127/EEC i.

9 UNECE Regulation No 13- General provisions

H (a) The braking system shall be built in accordance with (Braking) paragraph 5 of UNECE Regulation No 13-H.

(b) Vehicles shall be fitted with an electronic antilock braking system acting on all wheels.

(d) For those purposes, road tests shall be conducted on a track the surface of which possesses high adhesion. The test on the parking brake shall be conducted on a 18 % gradient (up and down).

Only those tests mentioned under the headings "Service brake" and "Parking brake" below shall be conducted. In each case, the vehicle shall be in fully laden conditions.

(e) The road test referred to in point (d) shall not be conducted where the applicant can submit a statement from the manufacturer establishing that the vehicle complies either with UNECE Regulation No 13-H, including supplement 5, or with FMVSS No 135.

Service brake

(a) A ‘Type 0’ test as prescribed in paragraphs 1.4.2 and 1.4.3 of Annex 3 to UNECE Regulation No 13-H shall be conducted.

(b) In addition, a ‘Type I’ test as prescribed in paragraph 1.5 of Annex 3 to UNECE Regulation No 13-H shall be conducted.

Parking brake

A test shall be conducted in accordance with paragraph 2.3 of Annex 3 to UNECE Regulation No 13-H.

10 UNECE Regulation No 10 Components

(Radio interference (a) Electrical/electronic sub-assemblies are not required to be (electromagnetic type-approved in accordance with UNECE Regulation compatibility)) No 10.

(b) However, electric/electronic devices retrofitted shall comply with UNECE Regulation No 10.

Emitted electromagnetic radiations

The applicant shall submit a statement from the manufacturer establishing that the vehicle complies with UNECE Regulation No 10 or with the following alternative standards:

— Broadband electromagnetic radiation: CISPR 12 or SAE J551-2, or

— Narrowband electromagnetic radiation: CISPR 12 (offboard) or 25 (in-board) or SAE J551-4 and SAE J1113-41.

Immunity tests

Immunity test shall be waived.

12 UNECE Regulation No 21 Interior arrangement

(Interior fittings) (a) With respect to the requirements on energy absorption, the vehicle shall be deemed to comply with UNECE Regulation No 21 if the vehicle is fitted with at least two front airbags, one inserted into the steering wheel and the other into the dashboard.

(b) Where the vehicle is fitted with only one front air bag inserted in the steering wheel, the dashboard shall be made up of energy absorbing materials.

(c) The technical service shall check that there are no sharp edges in the zones defined in paragraphs 5.1 to 5.7 of UNECE Regulation No 21.

Electrical controls

(a) Power-operated windows, roof–panel systems and partitioning systems shall be tested in accordance with

paragraph 5.8 of UNECE Regulation No 21.

The sensitivity of auto-reverse systems referred to in paragraph 5.8.3 may diverge from the requirements set out in paragraph 5.8.3.1.1 of UNECE Regulation No 21.

(b) Electric windows which cannot be closed when the ignition is off shall be exempt from the requirements concerning auto-reverse systems.

13 UNECE Regulation No 18 (a) In order to prevent unauthorised use, the vehicle shall be

fitted with: (Anti-theft and

immobiliser) — a locking device as defined in paragraph 2.3 of

UNECE Regulation No 18, and

— an immobiliser which meets the technical requirements of paragraph 5 of UNECE Regulation

No 18;

(b) If, in accordance with point (a), an immobiliser has to be retrofitted, it shall be of an approved type in accordance with UNECE Regulations No 18, No 97, or No 116.

14 UNECE Regulation No 12 (a) The applicant shall submit a statement from the

(Protective steering) manufacturer establishing that the particular vehicle, the VIN of which has to be specified, complies with at least one of

the following:

— UNECE Regulation No 12,

— FMVSS No 203 (Impact protection for the driver from the steering control system) including FMVSS No 204 (Steering control rearward displacement),

— Article 11 of JSRRV.

(b) A test in accordance with Annex 3 to UNECE Regulation No 12 may be conducted on a production vehicle at the request of the applicant.

The test shall be conducted by a technical service that has been designated for carrying out this test. A detailed report shall be issued by that technical service to the applicant.

15 UNECE Regulation No 17 Seats, seat anchorages and adjustment systems

(Seat strength — head The applicant shall submit a statement from the manufacturer restraints) establishing that the particular vehicle, the VIN of which has to be specified, complies with at least one of the following:

— UNECE Regulation No 17; or

— FMVSS No 207 (Seating systems).

Head restraints

(a) Where the statement is based on FMVSS No 207, the head restraints shall fulfil, in addition, the requirements of paragraph 5 and Annex 4 to UNECE Regulation No 17.

(b) Only the tests described in paragraphs 5.12, 6.5, 6.6 and 6.7 of UNECE Regulation No 17 shall be conducted.

(c) In the other event, the applicant shall submit a statement from the manufacturer establishing that the particular vehicle, the VIN of which has to be specified, complies with FMVSS No 202a (Head restraints).

16 UNECE Regulation No 17 (a) The external surface of the bodywork shall comply with the

(Exterior projections) general requirements included in paragraph 5 of UNECE Regulation No 17.

(b) At the discretion of the technical service the provisions referred to in paragraphs 6.1, 6.5, 6.6, 6.7, 6.8 and 6.11 of UNECE Regulation No 17 shall be checked.

17 UNECE Regulation No 39 Speedometer equipment

(Speedometer — reverse (a) The dial shall comply with paragraphs 5.1 to 5.1.4 of gear) UNECE Regulation No 39.

(b) Where the technical service wants to verify that the speedometer is calibrated with sufficient accuracy, it may require the tests prescribed in paragraph 5.2 of UNECE Regulation No 39 to be conducted.

Reverse gear

The gear mechanism shall include a reverse gear.

18 Regulation (EU) Vehicle identification number

No 19/2011 (a) The vehicle shall be fitted with a vehicle identification (Statutory plates) number comprising a minimum of 8 and a maximum of 17

characters. Vehicle identification number comprising 17 characters shall fulfil the requirements set out in Standards ISO 3779:1983 and 3780:1983.

(b) The vehicle identification number shall be located in a clearly visible and accessible position in such a way as it cannot be obliterated or deteriorate.

(c) Where no vehicle identification number is stamped in the chassis or in the body, a Member State may require the applicant that the VIN is retrofitted in application of its national law. In such a case, the competent authority of that Member State shall supervise the operation.

Statutory plate

The vehicle shall be fitted with an identification plate affixed by the vehicle manufacturer.

No additional plate shall be requested after the approval by the approval authority has been granted.

19 UNECE Regulation No 14 The applicant shall submit a statement from the manufacturer (Seat belt anchorages) establishing that the particular vehicle, the VIN of which has to be specified, complies with at least one of the following:

— UNECE Regulation No 14;

— FMVSS No 210 (Seat belt assembly anchorages), or

— Article 22-3 of JSRRV.

20 UNECE Regulation No 48 (a) The lighting installation shall meet the requirements of (Installation of lighting and UNECE Regulation No 48, series of amendments 03, with light signalling devices) the exception of the requirements of Annexes 5 and 6 to that Regulation.

(b) No exemption shall be permitted in respect of the number, the essential design characteristics, the electrical connections, and the colour of light emitted or retro-reflected of the lights and signalling devices referred to in items 21 to 26 and in items 28 to 30.

(c) Lights and signalling devices that, for the purpose of fulfilling the requirements of point (a) must be retrofitted shall bear an ‘EU’ type-approval mark.

(d) Lamps fitted with gas-discharged light source are only permitted in conjunction with the installation of headlamp cleaning device and an automatic headlamp-levelling device where appropriate.

(e) Headlamp dipped-beams shall be adapted to the direction of traffic legally in force in the country where the vehicle is granted approval.

21 UNECE Regulation No 3 Where necessary, two additional retro reflectors bearing an ‘EC’ (Retro reflectors) approval mark shall be added at the rear, the position of which shall comply with UNECE Regulation No 48.

22 UNECE Regulations No 7, The requirements set out in the UNECE Regulations No 7, No 87 No 87 and No 91 and No 91 shall not apply. However, the correct functioning of the

(End-outline, front position lights shall be checked by the technical service.

(side), rear-position (side), stop, side marker, daytime running lamps)

23 UNECE Regulation No 6 The requirements set out in UNECE Regulation No 6 shall not (Direction indicators) apply. However, the correct functioning of the lights shall be checked by the technical service.

24 UNECE Regulation No 4 The requirements set out in UNECE Regulation No 4 shall not (Rear registration plate apply. However, the correct functioning of the lights shall be lamps) checked by the technical service.

25 UNECE Regulations No 98, (a) The illumination produced by the passing beam of the No 112 and No 123 headlamps fitted to the vehicle shall be checked under (Headlamps (including paragraph 6 of UNECE Regulation No 112 concerning bulbs)) headlamps emitting an asymmetrical passing beam. The tolerances included in Annex 5 to that Regulation may be referred to for that purpose.

(b) The same requirement shall be fulfilled for the passing beam of headlamps covered by UNECE Regulation No 98 or No 123.

26 UNECE Regulation No 19 The requirements set out in UNECE Regulation No 19 shall not (Front fog lamps) apply. However, the correct functioning of the lights if fitted shall be checked by the technical service.

27 Regulation (EU) The requirements set out in Regulation (EU) No 1005/2010 i shall No 1005/2010 not apply.

(Towing hooks)

28 UNECE Regulation No 38 The requirements set out in UNECE Regulation No 38 shall not (Rear fog lamps) apply. However, the correct functioning of the lights shall be checked by the technical service.

29 UNECE Regulation No 23 The requirements set out in UNECE Regulation No 23 shall not (Reversing lamps) apply. However, the correct functioning of the lights if fitted shall be checked by the technical service.

30 UNECE Regulation No 77 The requirements set out in UNECE Regulation No 77 shall not (Parking lamps) apply. However, the correct functioning of the lights if fitted shall be checked by the technical service.

31 UNECE Regulation No 16 Components

(Seat belts and restraint

systems) (a) Seat belts shall not be required to be type-approved in

accordance with UNECE Regulation No 16.

(b) However, each seat belt shall bear an identification label.

Installation requirements

(a) The vehicle shall be fitted with seat belts in accordance with the requirements set out in Annex XVI to UNECE Regulation No 16.

(b) Where a number of seat belts have to be retrofitted in accordance with point (a), they shall be of an approved type in accordance with UNECE Regulation No 16.

32 UNECE Regulation No 125 (a) No obstruction in the 180° forward field of vision of the (Forward vision) driver as defined in paragraph 5.1.3 of UNECE Regulation No 125 shall be permitted.

(b) By derogation from point (a), the ‘A pillars’ and the equipment listed in paragraph 5.1.3 of UNECE Regulation No 125 shall not be considered as obstruction.

33 UNECE Regulation No 121 (a) The symbols including the colour of their corresponding tell(Identification of controls, tales the presence of which is mandatory by virtue of tell-tales and indicators) UNECE Regulation No 121 shall comply with that UNECE Regulation.

(b) Where this is not the case, the technical service shall verify that the symbols, tell-tales and indicators fitted to the vehicle provide the driver with comprehensible information about the operation of the controls in question.

34 Regulation (EU) The vehicle shall be equipped with adequate windscreen defrosting No 672/2010 and windscreen demisting devices.

(Defrost/Demist) A windscreen defrosting device which complies as a minimum

with point 1.1.1 of Annex II to Regulation (EU) No 672/2010 i shall be deemed ‘adequate’.

A windscreen demisting device which complies as a minimum with point 1.2.1 of Annex II to Regulation (EU) No 672/2010 i shall be deemed ‘adequate’.

35 Regulation (EU) The vehicle shall be equipped with adequate windscreen washing No 1008/2010 and windscreen wiping devices.

(Wash/Wipe) A windscreen washing and wiping device that complies as a

minimum with the conditions set out in point 1.1.5 of Annex III to

Regulation (EU) No 1008/2010 i shall be deemed ‘adequate’.

36 UNECE Regulation No 122 (a) The passenger compartment shall be fitted with a heating (Heating systems) system.

(b) Combustion heaters and their installation shall comply with Annex 7 to UNECE Regulation No 122. In addition, LPG combustion heaters and LPG heating systems shall fulfil the requirements set out in Annex 8 to UNECE Regulation No 122.

(c) Additional heating systems which are retrofitted shall comply with the requirements set out in that UNECE Regulation No 122.

37 Regulation (EU) (a) The vehicle shall be designed as to protect other road users No 1009/2010 (Wheel against thrown-up stones, mud, ice, snow and water and to guards) reduce the dangers due to contact with the moving wheels.

(b) The technical service may check that the technical requirements set out in Annex II to Regulation (EU) No 1009/2010 i are complied with.

38 UNECE Regulation No 25 The requirements of UNECE Regulation No 25 shall not apply.

(Head restraints)

44 Regulation (EU) (a) The requirements of section 1 of Part A of Annex I to No 1230/2012 (Masses and Regulation (EU) No 1230/2012 i shall be fulfilled.

dimensions) (b) For the purposes of point (a), the masses to be considered are

the following:

— the mass in running order defined in point 2.6 of Annex I to Regulation (EU) No 1230/2012 i as measured by the technical service, and

— the laden masses either stated by the vehicle manufacturer or shown on the manufacturer’s plate including stickers or information available in the owner’s manual. Those masses shall be deemed the technically permissible maximum laden masses.

permissible dimensions.

45 Regulation (EU) Components

No 1230/2012 (Safety (a) The glazing shall be made either of tempered or laminated glazing) safety glass.

(b) Fitting of plastic glazing shall be permitted only on locations situated behind the ‘B’ pillar.

Installation

(a) The installation requirements set out in Annex 21 to UNECE Regulation No 43 shall apply.

(b) No tinted films that would reduce the regular light transmission under the required minimum shall be permitted on the windscreen and on the glazing located in front of the ‘B’ pillar.

46 Directive 92/23/EEC i Components

(Tyres) Tyres shall bear an ‘EC’ type-approval mark including the symbol ‘s’ (for sound).

Installation

(a) The dimensions, load-capacity index and speed category of the tyres shall fulfil the requirements of Annex IV to Directive 92/23/EEC i.

(b) The speed category symbol of the tyre shall be compatible with the maximum design speed of the vehicle.

This requirement shall apply notwithstanding the presence of a speed limiter.

(c) The maximum speed of the vehicle shall be stated by the vehicle manufacturer. However, the technical service may assess the maximum design speed of the vehicle by using the engine maximum power output, the maximum number of revolutions per minute and the data concerning the kinematic chain.

50 UNECE Regulation No 55 Separate technical units

(Couplings) (a) OEM couplings intended for towing a trailer whose

maximum mass does not exceed 1 500 kg shall not be required to be type-approved under UNECE Regulation No 55.

A coupling is deemed OEM equipment where it is described in the owner’s manual or an equivalent supporting document provided to the buyer by the vehicle manufacturer.

Where such coupling is approved with the vehicle, an appropriate text shall be included in the approval certificate stating that the owner is responsible for ensuring compatibility with the coupling device fitted to the trailer.

(b) Couplings other than those referred to in point (a), as well as couplings that are retrofitted, shall be type-approved in accordance with UNECE Regulation No 55.

Installation on the vehicle

The technical service shall check that the installation of the coupling devices comply with paragraph 6 of UNECE Regulation No 55.

53 UNECE Regulation No 94 (a) The applicant shall submit a statement from the

(Frontal impact) ( ) manufacturer establishing that the particular vehicle, of which the VIN has to be specified, complies with at least one of the following:

— UNECE Regulation No 94,

— FMVSS No 208 (Occupant crash protection),

— Article 18 of JSRRV.

(b) A test in accordance with paragraph 5 of UNECE Regulation No 94 may be conducted on a production vehicle at the request of the applicant.

The test shall be conducted by a technical service that has been designated for carrying out this test. A detailed report shall be issued by that technical service to the applicant

54 UNECE Regulation No 95 (a) The applicant shall submit a statement from the (Side impact) manufacturer establishing that the particular vehicle, of

which the VIN has to be specified complies with at least one of the following:

— UNECE Regulation No 95,

— FMVSS No 214 (Side impact protection),

— Article 18 of JSRRV.

(b) A test in accordance with section 5 of UNECE Regulation No 95 may be conducted on a production vehicle at the request of the applicant.

The test shall be conducted by a technical service that has been designated for carrying out this test. A detailed report shall be issued by that technical service to the applicant.

58 Regulation (EC) Brake assist

No 78/2009 Vehicles shall be fitted with an electronic antilock braking system

(Pedestrian protection) acting on all wheels.

Pedestrian protection

The requirements of Regulation (EC) No 78/2009 i shall apply.

Frontal protection systems

Frontal protection systems installed on the vehicle shall be typeapproved in accordance with Regulation (EC) No 78/2009 i and their installation shall comply with the requirements set out in section 6 of Annex I to that Regulation.

59 Directive 2005/64/EC i The requirements of that Directive shall not apply.

(Recyclability)

61 Directive 2006/40/EC i The requirements of that Directive shall apply.

(Air-conditioning system)

Part II: Vehicles belonging to category N 1

Item Regulatory act reference Alternative requirements

2a Regulation (EC) Tailpipe emissions No 715/2007 (a) A type I test shall be conducted in accordance with Annex III Emissions (Euro 5 and 6) to Regulation (EC) No 692/2008 i using the deterioration light duty vehicles/access to factors set out in point 1.4 of Annex VII to Regulation (EC) information No 692/2008. The limits to be applied shall be those

specified in Table I and Table II in Annex I to Regulation (EC) No 715/2007 i.

(b) The vehicle shall not be required to exhibit 3 000 km as mentioned in paragraph 3.1.1 of Annex 4 to UNECE Regulation No 83.

(c) The fuel to be used for the test shall be the reference fuel as prescribed in Annex IX to Regulation (EC) No 692/2008 i.

(d) The dynamometer shall be set up in accordance with the technical requirements of paragraph 3.2 of Annex 4 to UNECE Regulation No 83.

(e) The test referred to in point (a) shall not be conducted where it can be shown that the vehicle complies with the California Code Regulations referred to in point 2 of Annex I to Regulation (EC) No 692/2008 i.

Evaporative emissions

For petrol-fuelled engines, the presence of an evaporate emissions control system (e.g. a charcoal canister) shall be required.

Crankcase emissions

The presence of a device for recycling crankcase gases shall be required.

OBD

The vehicle shall be fitted with an OBD system.

OBD-interface must be able to communicate with common diagnostic tools used for periodic technical inspections.

Smoke opacity

(a) Vehicles equipped with a diesel-fuelled engine shall be tested in accordance with the tests methods referred to in Appendix 2 to Annex IV to Regulation (EC) No 692/2008 i.

(b) The corrected value of the absorption coefficient shall be affixed, conspicuously and in a readily accessible place.

CO 2 emissions and fuel consumption

(a) A test shall be conducted in accordance with Annex XII to Regulation (EC) No 692/2008 i.

(b) The vehicle shall not be required to exhibit 3 000 km as requested in paragraph 3.1.1 of Annex 4 to UNECE Regulation No 83.

(c) Where the vehicle complies with the California Code Regulations referred to in point 2 of Annex I to Commission Regulation (EC) No 692/2008 i and therefore no test of tailpipe emissions is required to be performed, Member States shall calculate CO 2 emissions and fuel consumption with the formula laid down in the explanatory notes ( b ) and ( c ).

Access to information

The provisions regarding access to information shall not apply.

Power measurement

(a) The applicant shall submit a statement from the manufacturer stating the maximum engine power output in kW as well as the corresponding regime in revolutions per minute.

(b) An engine power output curve providing the same information may alternatively be provided by the applicant.

3 UNECE Regulation No 34 Fuel tanks

(Fuel tanks — Rear

protective devices) (a) Fuel tanks shall comply with paragraph 5 of UNECE Regulation No 34 with the exception of paragraphs 5.1, 5.2

and 5.12. In particular, they shall comply with paragraph 5.9 and 5.9.1 but no dripping test shall be conducted.

(b) LPG or CNG tanks shall be type-approved in accordance with, respectively UNECE Regulations No 67, series of amendments 01, or Regulation No 110 ( a ).

Specific provisions for fuel tanks made of a plastic material

The applicant shall submit a statement from the manufacturer establishing that the fuel tank on the particular vehicle, of which the VIN has to be specified, complies either with at least one of the following:

— FMVSS No 301 (Fuel system integrity),

— Annex 5 to UNECE Regulation No 34.

Rear protective device

(a) The rear part of the vehicle shall be constructed in accordance with paragraphs 8 and 9 of UNECE Regulation No 34.

4 Regulation (EU) Space, inclination, angles for visibility and position of the No 1003/2010 registration plate shall comply with Regulation (EU)

(Rear registration plate space) No 1003/2010.

5 UNECE Regulation No 79 Mechanical systems

(Steering effort) (a) The steering mechanism shall be built as to self-centre. In

order to check compliance with this provision, a test shall be conducted in accordance with paragraphs 6.1.2 and 6.2.1 of UNECE Regulation No 79.

(b) The failure of the power steering equipment shall not lead to a complete loss of control of the vehicle.

Complex electronic vehicle control system (‘Drive-by wire’ devices)

Complex electronic control system shall be permitted only if they comply with Annex 6 to UNECE Regulation No 79.

6 UNECE Regulation No 11 Compliance with paragraph 6.1.5.4 of UNECE Regulation No 11 (Door latches and hinges)

7 UNECE Regulation No 28 Components

(Audible warning) The audible warning devices are not required to be type-approved in accordance with UNECE Regulation No 28. However, they shall emit a continuous sound as required in paragraph 6.1.1 of UNECE Regulation No 28.

Installation on vehicle

(a) A test shall be conducted in accordance with paragraph 6.2 of UNECE Regulation No 28.

(b) The maximum sound pressure level shall be in accordance

with paragraph 6.2.7.

8 UNECE Regulation No 46 Components

(Indirect vision devices) (a) The vehicle shall be fitted with the rear-view mirrors

prescribed in paragraph 15.2 of UNECE Regulation No 46.

(b) They are not required to be type-approved in accordance with UNECE Regulation No 46.

(c) The radii of curvature of the mirrors shall not cause significant image distortions. At the discretion of the technical service, the radii of curvature shall be checked in accordance with the method described in Appendix 1 to Annex 7 to UNECE Regulation No 46. The radii of curvature shall not be less than those required by paragraph 6.1.2.2.4 of UNECE Regulation No 46.

Installation on vehicle

Measurement shall be conducted in order to ensure that the fields of vision comply with paragraph 15.2.4. of UNECE Regulation No 46.

9 UNECE Regulation No 13-H General provisions

(Braking) (a) The braking system shall be built in accordance with paragraph 5 of UNECE Regulation No 13-H.

(b) Vehicles shall be fitted with an electronic antilock braking system acting on all wheels.

(d) For these purposes, road tests shall be conducted on a track the surface of which possesses high adhesion. The test on the parking brake shall be conducted on a 18 % gradient (up and down).

Only those tests mentioned under the headings "Service brake" and "Parking brake" below shall be conducted. In each case, the vehicle shall be in fully laden conditions.

(e) The road test referred to in point (c) shall not be conducted where the applicant can submit a statement from the manufacturer establishing that the vehicle complies either with UNECE Regulation No 13-H including supplement 5 or with FMVSS No 135.

Service brake

(a) A ‘Type 0’ test as prescribed in paragraphs 1.4.2 and 1.4.3 of Annex 3 to UNECE Regulation No 13-H shall be conducted.

(b) In addition, a ‘Type I’ test as prescribed in paragraph 1.5 of Annex 3 to UNECE Regulation No 13-H shall be conducted.

Parking brake

A test shall be conducted in accordance with paragraph 2. 3 of Annex 3 to UNECE Regulation No 13-H.

10 UNECE Regulation No 10 Components

(Radio interference (a) Electrical/electronic sub-assemblies are not required to be

(electromagnetic

compatibility)) type-approved in accordance with UNECE Regulation No 10.

(b) However, electric/electronic devices retrofitted shall comply with UNECE Regulation No 10.

Emitted electromagnetic radiations

The applicant shall submit a statement from the manufacturer establishing that the vehicle complies with UNECE Regulation No 10 or with the following alternative standards:

— Broadband electromagnetic radiation: CISPR 12 or SAE J551-2,

— Narrowband electromagnetic radiation: CISPR 12 (offboard) or 25 (in-board) or SAE J551-4 and SAE J1113-41.

Immunity tests

Immunity test shall be waived.

13 UNECE Regulation No 116 (a) In order to prevent unauthorised use, the vehicle shall be

(Anti-theft and immobiliser) fitted with a locking device as defined in paragraph 5.1.2 of UNECE Regulation No 116.

(b) If an immobiliser is fitted, it shall comply with the technical requirements of paragraph 8.1.1 of UNECE Regulation No 116.

14 UNECE Regulation No 12 (a) The applicant shall submit a statement from the (Protective steering) manufacturer establishing that the particular vehicle, the VIN

of which has to be specified, complies with at least one of the following:

— UNECE Regulation No 12,

— FMVSS No 203 (Impact protection for the driver from the steering control system) including FMVSS No 204 (Steering control rearward displacement),

— Article 11 of JSRRV.

(b) A test in accordance with Annex 3 to UNECE Regulation No 12 may be conducted on a production vehicle at the request of the applicant. The test shall be conducted by a technical service that has been designated for carrying out this test. A detailed report shall be issued by that technical service to the applicant.

15 UNECE Regulation No 17 Seats, seat anchorages and adjustment systems

(Seats strength — head restraints) Seats and their adjustable systems shall comply with paragraph 5.3 of UNECE Regulation No 17.

Head restraints

(a) Head restraints shall fulfil the requirements of section 5 of UNECE Regulation No 17 and Annex 4 to UNECE Regulation No 17.

(b) Only the tests described in paragraphs 5.12, 6.5, 6.6 and 6.7 of UNECE Regulation No 17shall be conducted.

17 UNECE Regulation No 39 Speedometer equipment

(Speedometer — reverse

gear) (a) The dial shall comply with paragraphs 5.1 to 5.14 of UNECE Regulation No 39.

(b) When the technical service has reasonable grounds to believe that the speedometer is not calibrated with a sufficient accuracy, it may require that the tests prescribed in paragraph 5.2 of UNECE Regulation No 39 be conducted.

Reverse gear

The gear mechanism shall include a reverse gear.

18 Regulation (EU) No 19/2011 i Vehicle identification number

(Statutory plates) (a) The vehicle shall be fitted with a vehicle identification

number comprising a minimum of 8 and a maximum of 17 characters. Vehicle identification number comprising 17 characters shall fulfil the requirements set out in Standards ISO 3779:1983 and 3780:1983.

(b) The vehicle identification number shall be located in a clearly visible and accessible position in such a way as it cannot be obliterated or deteriorate.

(c) Where no vehicle identification number is stamped in the chassis or in the body, a Member State may require that it is retrofitted in application of its national law. In such a case, the competent authority of that Member State shall supervise the operation.

Statutory plate

The vehicle shall be fitted with an identification plate affixed by the vehicle manufacturer.

No additional plate shall be requested after the approval has been granted.

19 UNECE Regulation No 14 The applicant shall submit a statement from the manufacturer

(Seat belt anchorages) establishing that the particular vehicle, of which the VIN has to be specified, complies with at least one of the following:

— UNECE Regulation No 14,

— FMVSS No 210 (Seat belt assembly anchorages),

— Article 22-3 of JSRRV.

20 UNECE Regulation No 48 (a) The lighting installation shall meet the essential (Installation of lighting and requirements of UNECE Regulation No 48 series of light signalling devices) amendments 03 with the exception of those of Annexes 5 and 6 to UNECE Regulation No 48.

(c) Lights and signalling devices that, for the purpose of fulfilling with the requirements of point (a) must be retrofitted shall bear an ‘EU’ type-approval mark.

(d) Lamps fitted with gas-discharged light source are only permitted in conjunction with the installation of headlamp cleaning device and an automatic headlamp-levelling device where appropriate.

(e) Headlamp dipped-beams shall be adapted to the direction of traffic legally in force in the country where the vehicle is granted approval.

22 UNECE Regulations No 7, The requirements set out in UNECE Regulations No 7, No 87 and No 87 and No 91 No 91 shall not apply. However, the correct functioning of the

(End-outline, front position lights shall be checked by the technical service.

(side), rear-position (side), stop, side marker, daytime running lamps)

25 UNECE Regulations No 98, (a) The illumination produced by the passing beam of the No 112 and No 123 headlamps fitted to the vehicle shall be checked under the (Headlamps (including provisions of paragraph 6 of UNECE Regulation No 112 bulbs)) concerning headlamps emitting an asymmetrical passing beam. The tolerances included in Annex 5 to that Regulation may be referred to for that purpose.

(b) The same requirement shall apply to the passing beam of headlamps covered by UNECE Regulation No 98 or No 123.

26 UNECE Regulation No 19 The provisions of UNECE Regulation No 19 shall be waived. (Front fog lamps) However, the correct functioning of the lights if fitted shall be checked by the technical service.

27 Regulation (EU) The requirements of Regulation (EU) No 1005/2010 i shall be No 1005/2010 (Towing waived.

hooks)

28 UNECE Regulation No 38 The provisions of UNECE Regulation No 38 shall be waived. (Rear fog lamps) However, the correct functioning of the lights shall be checked by the technical service.

29 UNECE Regulation No 23 The provisions of UNECE Regulation No 23 shall be waived.

(Reversing lamps) However, the correct functioning of the lights if fitted shall be checked by the technical service.

30 UNECE Regulation No 77 The provisions of UNECE Regulation No 77 shall be waived. (Parking lamps) However, the correct functioning of the lights if fitted shall be checked by the technical service.

31 UNECE Regulation No 16 Components

(Seat belts and restraint

systems) (a) Seat belts shall not be required to be type-approved in

accordance with UNECE Regulation No 16.

(b) However, each seat belt shall bear an identification label.

Installation requirements

(a) The vehicle shall be fitted with seat belts in accordance with the requirements set out in Annex XVI to UNECE Regulation No 16.

(b) Where a number of seat belts have to be retrofitted in accordance with point (a), they shall be of an approved type in accordance with UNECE Regulation No 16.

34 Regulation (EU) The vehicle shall be equipped with adequate windscreen No 672/2010 defrosting and windscreen demisting devices.

(Defrost/Demist)

35 Regulation (EU) The vehicle shall be equipped with adequate windscreen washing No 1008/2010 and windscreen wiping devices.

(Wash/Wipe)

36 UNECE Regulation No 122 (a) The passenger compartment shall be fitted with a heating

(Heating systems) system.

(c) Additional heating systems that are retrofitted shall comply with the requirements set out in UNECE Regulation No 122.

41a Regulation (EC) Tailpipe emissions

No 595/2009 (a) A test shall be conducted in accordance with Annex III to

Emissions (Euro VI) heavyduty

vehicles – OBD Regulation (EU) No 582/2011 i using the deterioration factors set out in point 3.6.1. of Annex VI to Regulation (EU)

No 582/2011.

(b) The limits to be applied shall be those set out in the table of Annex I to Regulation (EC) No 595/2009 i.

(c) The fuel to be used for the test shall be the reference fuel as prescribed in Annex IX to Regulation (EU) No 582/2011 i.

CO 2 emissions

The CO 2 emissions and fuel consumption shall be determined in accordance with Annex VIII to Regulation (EU) No 582/2011 i.

OBD

(a) The vehicle shall be fitted with an OBD system.

(b) The OBD-interface must be able to communicate with an external OBD scan-tool as described in Annex X to Regulation (EU) No 582/2011 i.

Requirements to ensure the correct operation of NO x control measures

The vehicle shall be fitted with a system ensuring the correct operation of NO x control measures in accordance with Annex XIII to Regulation (EU) No 582/2011 i.

Power measurement

(a) The applicant shall submit a statement from the manufacturer stating the maximum engine power output in Kw as well as the corresponding regime

(b) An engine power output curve providing the same information may alternatively be provided by the applicant.

45 UNECE Regulation No 43 Components

(a) The glazing shall be made either of tempered or laminated safety glass.

(b) Fitting of plastic glazing shall be permitted only on locations situated behind the ‘B’ pillar.

Regulation No 43.

Installation

(a) The installation requirements set out in Annex 21 to UNECE Regulation No 43 shall apply.

(b) No tinted films that reduce the regular light transmission under the required minimum shall be permitted on the windscreen and on the glazing located in front of the ‘B’ pillar.

46 Commission Regulation (EU) Installation

458/2011 (a) The dimensions, load-capacity index and speed category of (Installation of tyres) the tyres shall fulfil the requirements of Commission

(b) The speed category symbol of the tyre shall be compatible with the maximum design speed of the vehicle.

(d) The maximum speed of the vehicle shall be stated by the vehicle manufacturer. However, the technical service may assess the maximum design speed of the vehicle by using the engine maximum power output, the maximum number of revolutions per minute and the data concerning the kinematic chain.

46B UNECE Regulation No 30 Components

(C1 tyres) Tyres shall bear an ‘E’ type-approval mark.

46D UNECE Regulation No 117 Components

(tyre rolling sound emissions,

adhesion on wet surface and Tyres shall bear an ‘E’ type-approval mark.

rolling resistance)

46D Regulation (EC) Components

No 661/2009

UNECE Regulation No 64 Tyres shall bear an ‘E’ type-approval mark. (temporary use spare unit, The fitting of TPMS shall not be required

run-flat tyres, tyre rolling sound emissions, adhesion on wet surface and rolling resistance)

48 Regulation (EU) (a) The requirements of Annex I, Part A to Regulation (EU) No 1230/2012 i No 1230/2012 shall be fulfilled.

(Masses and dimensions) However, the requirements set out in point 5 of Part A of Annex I do not need to be fulfilled.

(b) For the purposes of point (a) the masses to be considered are the following:

— the mass in running order as defined in Article 2(4) of Regulation (EU) No 1230/2012 i as measured by the technical service, and

— the maximum laden masses either stated by the vehicle manufacturer or shown on the manufacturer’s plate, including stickers or information available in the owner’s manual. Those masses shall be regarded as the technically permissible maximum laden masses.

(c) Technical changes made by the applicant in order to decrease the maximum technically permissible laden mass of the vehicle to 3,5 tonnes or less, so that the vehicle may be granted individual vehicle approval shall not be permitted.

(d) No exemption shall be permitted in respect of the maximum

permissible dimensions.

49 UNECE Regulation No 61 (a) The general requirements set out in section 5 of UNECE (External projections of cabs) Regulation No 17 shall be fulfilled.

(b) At the discretion of the technical service, the requirements set out in paragraphs 6.1, 6.5, 6.6, 6.7, 6.8 and 6.11 of UNECE Regulation No 17 shall be fulfilled.

50 UNECE Regulation No 55 Separate technical units

(Couplings) (a) OEM couplings intended for towing a trailer of which the

maximum mass does not exceed 1 500 kg shall not be required to be type-approved under UNECE Regulation No 55.

(b) A coupling is deemed OEM equipment where it is described in the owner’s manual or in an equivalent supporting document provided to the buyer by the vehicle manufacturer.

(c) Where such coupling is approved with the vehicle, an appropriate text shall be included in the approval certificate stating that the owner is responsible for ensuring compatibility with the coupling device fitted to the trailer.

(d) Couplings other than those referred to in point (a), as well as couplings that are retrofitted, shall be type-approved in accordance with UNECE Regulation No 55.

Installation on the vehicle

The technical service shall check that the installation of the coupling devices comply with paragraph 6 to UNECE Regulation No 55.

54 UNECE Regulation No 95 (a) The applicant shall submit a statement from the

(Side impact) manufacturer establishing that the particular vehicle, of which the VIN has to be specified, complies with at least one

of the following: — UNECE Regulation No 95, — FMVSS No 214 (Side impact protection), — Article 18 of JSRRV.

(b) A test in accordance with section 5 of UNECE Regulation No 95 may be conducted on a production vehicle at the request of the applicant.

(c) The test shall be conducted by a technical service that been designated for carrying out this test. A detailed report shall be issued by that technical service to the applicant.

56 UNECE Regulation No 105 Vehicles intended for the transport of dangerous goods shall

Vehicles intended for the comply with UNECE Regulation No 105.

transport of dangerous goods

58 Regulation (EC) No 78/2009 i Brake assist

(Pedestrian protection) Vehicles shall be fitted with an electronic antilock braking system acting on all wheels.

Pedestrian protection

Until 24 February 2018, the requirements of Regulation (EC) No 78/2009 i shall not apply to vehicles of which the maximum mass does not exceed 2 500 kg and until 24 August 2019 to vehicles of which the maximum mass exceeds 2 500 kg.

Frontal protection systems

However, frontal protection systems installed on the vehicle shall be type-approved in accordance with Regulation (EC) No 78/2009 i and their installation shall comply with the requirements set out in section 6 of Annex I to that Regulation.

59 Directive 2005/64/EC i The requirements of that Directive shall not apply.

(Recyclability)

61 Directive 2006/40/EC i The requirements of that Directive shall apply.

(Air-conditioning system)

Explanatory notes to Appendix 2

1.

Abbreviations used in this Appendix:
‘OEM’: original equipment provided by the manufacturer ‘FMVSS’: Federal Motor Vehicle Safety Standard of the U.S Department of Transportation ‘JSRRV’: Japan Safety Regulations for Road Vehicles ‘SAE’: Society of Automotive Engineers ‘CISPR’: Comité international spécial des perturbations radioélectriques.

2.

Remarks:
(a) the complete LPG or CNG installation shall be checked against the provisions of UNECE Regulations No 67, No 110 or No 115, as appropriate;

(b) the formula to be used for the assessment of CO 2 emissions shall be as follows:

Petrol engine and manual gearbox: CO 2 = 0,047 m + 0,561 p + 56,621

Petrol engine and automatic gearbox: CO 2 = 0,102 m + 0,328 p + 9,481

Petrol engine and hybrid electric: CO 2 = 0,116 m – 57,147

Diesel engine and manual gearbox: CO 2 = 0,108 m – 11,371

Diesel engine and automatic gearbox: CO 2 = 0,116 m – 6,432

Where: CO 2 is the combined mass of CO 2 emissions in g/km, ‘m’ is the mass of the vehicle in running order in kg and ‘p’ the maximum engine power output in kW.

Combined mass of CO 2 shall be calculated with one decimal place, then rounded to the nearest whole number as follows: (i) if the figure following the decimal point is below 5, the total is rounded down; (ii) if the figure following the decimal point is equal to 5 or above 5, the total is rounded up;

(c) the formulæ to be used for the assessment of fuel consumption shall be as follows:

CFC = CO 2 x k -1

Where: CFC is the combined fuel consumption in l/100 km, CO 2 is the combined mass of CO 2 emissions in g/km after it has been rounded in accordance with the rule referred to in Remark (2 b), ‘k’ a coefficient equal to:

23,81 in the case of a petrol engine;

26,49 in the case of a diesel engine.

Combined fuel consumption shall be calculated with two decimal places, then rounded as follows:

(i) if the figure following the first decimal is below 5, the total is rounded down;

(ii) if the figure following the first decimal is equal to 5 or above 5, the total is rounded up.

PART II

List of UNECE regulations recognised as an alternative to the Directives or Regulations

referred to in Part I

Where reference is made to a separate Directive or Regulation in the table of Part I, an approval granted under the following UNECE regulations which the Community has accepted as a Contracting Party to the United Nations Economic Commission for Europe ‘Revised

1958 Agreement’ by virtue of Council Decision 97/836/EC i 29 , or subsequent Council

Decisions as referred to in Article 3(3) of that Decision, shall be considered as equivalent to an EU type-approval granted under the relevant separate Directive or Regulation.

Any further amendment to the UNECE regulations listed in the following table 30 shall also be

deemed to be equivalent to an EU type-approval, subject to the Decision referred to in Article 4(2) of Decision 97/836/EC i.

Subject Basic UNECE Series of Regulation number amendments

1 ( * ) Permissible sound level 51 02

Replacement silencing systems 59 00

58.

Pedestrian protection 127 00

Braking (brake assist) 13-H 00 (Supplement 9 and above)

65 Advanced emergency braking system 131 01

66 Lane departure warning system 130 00

Where the separate Directive or Regulation contains installation requirements, these apply also to components and separate technical units approved in accordance with UNECE regulations.

( * ) The numbering of the entries in this table refers to the numbering used in the table of Part I.

29 Council Decision 97/836/EC i of 27 November 1997 with a view to accession by the European

Community to the Agreement of the United Nations Economic Commission for Europe concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted to and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions ('Revised 1958 Agreement') (OJ L 346, 17.12.1997, p. 78).

30 For subsequent amendments, see UNECE TRANS/WP.29/343.

PART III

List of regulatory acts setting out the requirements for the purpose of EU type-approval

of special purpose vehicles

Appendix 1

Motor-caravans, ambulances and hearses

Item Subject Regulatory act M 1 ≤ 2500 M 1 > 2500 M 2 M 3 reference kg( * ) kg( * )

1 Sound level Directive H G+H G+H G+H 70/157/EEC

1A Sound level Regulation (EU) H G+H G+H G+H No 540/2014

2 Emissions (Euro 5 and 6) Directive Q( 1 ) 1 G + Q( ) G + Q( 1 )

light duty vehicles / access 70/220/EEC to information

3A Prevention of fire risks Regulation (EC) F ( 2 ) F ( 2 ) F ( 2 ) F ( 2 )

(liquid fuel tanks) No 661/2009

UNECE Regulation No 34

3B Rear underrun protective Regulation (EC) X X X X devices (RUPDs) and their No 661/2009

installation; rear underrun

protection (RUP) UNECE Regulation No 58

4A Space for mounting and Regulation (EC) X X X X fixing rear registration No 661/2009

plates Regulation (EU)

No 1003/2010

5A Steering equipment Regulation (EC) X G G G

No 661/2009

UNECE Regulation No 79

6A Vehicle access and Regulation (EC) X X manoeuvrability No 661/2009

6B Door latches and door Regulation (EC) B G+B retention components No 661/2009

UNECE Regulation No 11

7A Audible warning devices Regulation (EC) X X X X and signals No 661/2009

UNECE Regulation No 28

Item Subject Regulatory act M 1 ≤ 2500 M 1 > 2500 M2 M3

reference kg( * ) kg( * )

8A Devices for indirect vision Regulation (EC) X G G G and their installation No 661/2009

UNECE Regulation No 46

9A Braking of vehicles and Regulation (EC) X ( 4 ) G+A 1

trailers No 661/2009

UNECE Regulation No 13-H

9B Braking of vehicles and Regulation (EC) G( 3 ) G( 3 ) trailers No 661/2009

UNECE Regulation No 13

10A Electromagnetic Regulation (EC) X X X X compatibility No 661/2009

UNECE Regulation No 10

12A Interior fittings Regulation (EC) C G+C

No 661/2009

UNECE Regulation No 21

13A Protection of motor Regulation (EC) G ( 4A ) G ( 4A ) vehicles against No 661/2009

unauthorised use UNECE Regulation

No 18

13B Protection of motor Regulation (EC) X G vehicles against No 661/2009

unauthorised use UNECE Regulation

No 116

14A Protection of the driver Regulation (EC) X G against the steering No 661/2009

mechanism in the event of

impact UNECE Regulation No 12

15A Seats, their anchorages and Regulation (EC) D G+D G+D ( 4B ) G+D ( 4B )

any head restraints No 661/2009

UNECE Regulation No 17

15B Seats of large passenger Regulation (EC) X X vehicles No 661/2009

UNECE Regulation No 80

Item Subject Regulatory act M 1 ≤ 2500 M 1 > 2500 M3 reference kg( * ) kg( *

M2 )

16A External projections Regulation (EC) X for the cab; G for the cab;

No 661/2009 A+Z for the A+Z for the

UNECE Regulation remaining remaining No 26 part part

17A Vehicle access and Regulation (EC) X X X X manoeuvrability No 661/2009

17B Speedometer equipment Regulation (EC) X X X X including its installation No 661/2009

UNECE Regulation No 39

18A Manufacturer’s statutory Regulation (EC) X X X X plate and vehicle No 661/2009

identification number Regulation (EU)

No 19/2011

19A Safety-belt anchorages, Regulation (EC) D G+L G+L G+L

Isofix anchorages systems No 661/2009 and Isofix top tether

anchorages UNECE Regulation No 14

20A Installation of lighting and Regulation (EC) A+N A+G+N for A+G+N for A+G+N for light-signalling devices on No 661/2009 the cab; A+N the cab; A+N the cab; A+N

vehicles UNECE Regulation for the for the for the

No 48 remaining remaining remaining part part part

21A Retro-reflecting devices Regulation (EC) X X X X for power-driven vehicles No 661/2009

and their trailers UNECE Regulation

No 3

22A Front and rear position Regulation (EC) X X X X lamps, stop-lamps and No 661/2009

end-outline marker lamps

for motor vehicles and UNECE Regulation their trailers No 7

22B Daytime running lamps for Regulation (EC) X X X X power-driven vehicles No 661/2009

UNECE Regulation No 87

22C Side-marker lamps for Regulation (EC) X X X X motor vehicles and their No 661/2009

trailers UNECE Regulation

No 91 Item Subject Regulatory act M 1 ≤ 2500 M 1 > 2500 M2 M3

reference kg( * ) kg( * )

23A Direction indicators for Regulation (EC) X X X X power-driven vehicles and No 661/2009

their trailers UNECE Regulation

No 6

24A Illumination of rear Regulation (EC) X X X X registration plates of No 661/2009

power-driven vehicles and

their trailers UNECE Regulation No 4

25A Power-driven vehicle’s Regulation (EC) X X X X sealed-beam headlamps No 661/2009

(SB) emitting an European

asymmetrical passing UNECE Regulation beam or a driving beam or No 31

both

25B Filament lamps for use in Regulation (EC) X X X X approved lamp units of No 661/2009

power-driven vehicles and

their trailers UNECE Regulation No 37

25C Motor vehicle headlamps Regulation (EC) X X X X equipped with gas No 661/2009

discharge light sources UNECE Regulation

No 98

25D Gas-discharge light Regulation (EC) X X X X sources for use in No 661/2009

approved gas-discharge

lamp units of power-driven UNECE Regulation vehicles No 99

25E Motor vehicle headlamps Regulation (EC) X X X X emitting an asymmetrical No 661/2009

passing beam or a driving

beam or both and equipped UNECE Regulation with filament lamps and/or No 112

LED modules

25F Adaptive front-lighting Regulation (EC) X X X X systems (AFS) for motor No 661/2009

vehicles UNECE Regulation

No 123

26A Power-driven vehicle front Regulation (EC) X X X X fog lamps No 661/2009

UNECE Regulation No 19

27A Towing device Regulation (EC) E E E E No 661/2009

Item Subject Regulatory act reference M 1 ≤ 2500 M 1 > 2500 M2 M3 kg( * ) kg( * )

28A Rear fog lamps for power Regulation (EC) X X X X driven vehicles and their No 661/2009

trailers UNECE Regulation

No 38

29A Reversing lights for Regulation (EC) X X X X power-driven vehicles and No 661/2009

their trailers UNECE Regulation

No 23

30A Parking lamps for power Regulation (EC) X X X X driven vehicles No 661/2009

UNECE Regulation No 77

31A Safety-belts, restraint Regulation (EC) D G+M G+M G+M systems, child restraint No 661/2009

systems and Isofix child

restraint systems UNECE Regulation No 16

32A Forward field of vision Regulation (EC) X G

No 661/2009

UNECE Regulation No 125

33A Location and identification Regulation (EC) X X X X of hand controls, tell-tales No 661/2009

and indicators UNECE Regulation

No 121

34A Windscreen defrosting and Regulation (EC) X 5 G ( ) ( 5 ) ( 5 ) demisting systems No 661/2009

35A Windscreen wiper and Regulation (EC) X 6 G ( ) ( 6 ) ( 6 )

washer systems No 661/2009

36A Heating systems Regulation (EC) X X X X No 661/2009

UNECE Regulation No 122

37A Wheel guards Regulation (EC) X G

No 661/2009

Item Subject Regulatory act M 1 ≤ 2500 M 1 > 2500

reference kg( * ) kg( *

M2 M3 )

38A Head restraints (headrests), Regulation (EC) D G + D

whether or not No 661/2009 incorporated in vehicle

seats UNECE Regulation No 25

44A Masses and dimensions Regulation (EC) X X

No 661/2009

45A Safety glazing materials Regulation (EC) J G+J G+J G+J and their installation on No 661/2009

vehicles UNECE Regulation

No 43

46 Tyres Directive 92/23/EEC i X G G G

46A Installation of tyres Regulation (EC) X G G G No 661/2009

46B Pneumatic tyres for motor Regulation (EC) X G vehicles and their trailers No 661/2009

(Class C1) UNECE Regulation

No 30

46C Pneumatic tyres for Regulation (EC) — G G G commercial vehicles and No 661/2009

their trailers (Classes C2

and C3) UNECE Regulation No 54

46D Tyre rolling sound Regulation (EC) X G G G emissions, adhesion on No 661/2009

wet surfaces and rolling

resistance (Classes C1, C2 UNECE Regulation and C3) No 117

46E Temporary-use spare unit, Regulation (EC) X G run-flat tyres/system and No 661/2009

tyre pressure monitoring

system UNECE Regulation No 64

47A Speed limitation of Regulation (EC) X X vehicles No 661/2009

UNECE Regulation No 89

Item Subject Regulatory act M1 ≤ 2500 M1 > 2500 M2 M3

reference kg( * ) kg( * )

48A Masses and dimensions Regulation (EC) X X

No 661/2009

50A Mechanical coupling Regulation (EC) X ( 10 ) G ( 10 ) G ( 10 ) G ( 10 ) components of No 661/2009

combinations of vehicles UNECE Regulation

No 55

51A Burning behaviour of Regulation (EC) G for the cab; materials used in the No 661/2009 X for the

interior construction of

certain categories of motor UNECE Regulation

remaining

vehicles No 118

part

52A M 2 and M 3 vehicles Regulation (EC) A A

No 661/2009

UNECE Regulation No 107

52B Strength of the Regulation (EC) A A superstructure of large No 661/2009

passenger vehicles UNECE Regulation

No 66

53A Protection of occupants in Regulation (EC) N/A N/A the event of a frontal No 661/2009

collision UNECE Regulation

No 94

54A Protection of occupants in Regulation (EC) N/A N/A the event of lateral No 661/2009

collision UNECE Regulation

No 95

58 Pedestrian protection Regulation (EC) X N/A

No 78/2009 However, any

frontal protection systems supplied with the vehicle shall comply and shall be marked

59 Recyclability Directive 2005/64/EC i N/A N/A

61 Air-conditioning system Directive 2006/40/EC i X G ( 14 )

62 Hydrogen system Regulation (EC) Q G + Q G + Q G + Q

No 79/2009 Item Subject Regulatory act M1 ≤ 2500 M1 > 2500 M2 M3

reference kg(*) kg(*)

63 General safety Regulation (EC) X ( 15 ) X ( 15 ) X ( 15 ) X ( 15 )

No 661/2009

64 Gear shift indicators Regulation (EC) X G

No 661/2009

65 Advanced emergency Regulation (EC) 16 N/A ( ) 16 N/A ( )

braking system No 661/2009

66 Lane departure warning Regulation (EC) 17 N/A ( ) 17 N/A ( ) system No 661/2009

67 Specific components for Regulation (EC) X X X X liquefied petroleum gases No 661/2009

(LPG) and their

installation on motor UNECE Regulation vehicles No 67

68 Vehicle alarm systems Regulation (EC) X G

(VAS) No 661/2009

UNECE Regulation No 97

69 Electrical safety Regulation (EC) X X X X

No 661/2009

UNECE Regulation No 100

70 Specific components for Regulation (EC) X X X X

CNG and their installation No 661/2009

on motor vehicles UNECE Regulation

No 110

( * ) Technically permissible maximum laden mass.

Additional requirements for ambulances

The patient compartment of ambulances shall comply with the requirements of EN 1789:2007 +A1: 2010 +A2:2014 on Medical vehicles and their equipment – Road ambulances with the exception of section 6.5, list of equipment. Proof of compliance shall be provided with a test report of a technical service. If a wheelchair space is foreseen, the requirements of Appendix 3 relating to the wheelchair tie down and occupant restraint systems shall apply.

Appendix 2

Armoured vehicles

Item Subject Regulatory act M 1 M 2 M 3 N 1 N 2 N 3 O 1 O 2 O 3 O 4 reference

1A Sound level Regulation X X X X X X (EU) No

540/2014

2 Emissions (Euro 5 Regulation (EC) A( 1 ) A( 1 ) A( 1 ) A( 1 )

and 6) light duty No 715/2007 vehicles/access to information

3A Prevention of fire Regulation (EC) 2 X ( ) X ( 2 ) X ( 2 ) X ( 2 ) X ( 2 ) X ( 2 ) X X X X risks (liquid fuel No 661/2009

tanks) UNECE

Regulation No 34

3B Rear underrun Regulation (EC) X X X X A A X X X X protective devices No 661/2009

(RUPDs) and their

installation; rear UNECE underrun protection Regulation No 58

(RUP)

4A Space for mounting Regulation (EC) X X X X X X X X X X and fixing rear No 661/2009

registration plates Regulation (EU)

No 1003/2010

5A Steering equipment Regulation (EC) X X X X X X X X X X No 661/2009

UNECE Regulation No 79

6A Vehicle access and Regulation (EC) X X X X X X manoeuvrability No 661/2009

6B Door latches and Regulation (EC) X X door retention No 661/2009

components UNECE

Regulation No 11

7A Audible warning Regulation (EC) A+K A+K A+K A+K A+K A+K devices and signals No 661/2009

UNECE Regulation No 28

8A Devices for indirect Regulation (EC) A A A A A A vision and their No 661/2009

installation UNECE

Regulation No 46

9A Braking of vehicles Regulation (EC) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) X ( 3 ) and trailers No 661/2009

UNECE Regulation No 13

9B Braking of Regulation (EC) 4 X ( ) X ( 4 ) passenger cars No 661/2009

UNECE Regulation No 13-H

10A Electromagnetic Regulation (EC) X X X X X X X X X X compatibility No 661/2009

UNECE Regulation No 10

12A Interior fittings Regulation (EC) A

No 661/2009

UNECE Regulation No 21

13A Protection of motor Regulation (EC) X( 4A ) X( 4A ) X( 4A ) X( 4A )

vehicles against No 661/2009

unauthorised use UNECE

Regulation No 18

13B Protection of motor Regulation (EC) X X vehicles against No 661/2009

unauthorised use UNECE

Regulation No 116

14A Protection of the Regulation (EC) N/A N/A driver against the No 661/2009

steering mechanism

in the event of UNECE impact Regulation No 12

15A Seats, their Regulation (EC) X D( 4B ) D( 4B ) D D D anchorages and any No 661/2009

head restraints UNECE

Regulation No 17

15B Seats of large Regulation (EC) D D passenger vehicles No 661/2009

UNECE Regulation No 80

16A External Regulation (EC) A projections No 661/2009

UNECE Regulation No 26

17A Vehicle access and Regulation (EC) X X X X X X manoeuvrability No 661/2009

17B Speedometer Regulation (EC) X X X X X X equipment No 661/2009

including its

installation UNECE Regulation No 39

18A Manufacturer’s Regulation (EC) X X X X X X X X X X statutory plate and No 661/2009

vehicle

identification Regulation (EU) number No 19/2011

19A Safety-belt Regulation (EC) A A A A A A anchorages, Isofix No 661/2009

anchorages systems

and Isofix top UNECE tether anchorages Regulation No 14

20A Installation of Regulation (EC) A+N A+N A+N A+N A+N A+N A+N A+N A+N A+N lighting and light No 661/2009

signalling devices

on vehicles UNECE Regulation No 48

21A Retro-reflecting Regulation (EC) X X X X X X X X X X devices for power No 661/2009

driven vehicles and

their trailers UNECE Regulation No 3

22A Front and rear Regulation (EC) X X X X X X X X X X position lamps, No 661/2009

stop-lamps and

end-outline marker UNECE lamps for motor Regulation No 7

vehicles and their trailers

22B Daytime running Regulation (EC) X X X X X X lamps for power No 661/2009

driven vehicles UNECE

Regulation No 87 22C Side-marker lamps Regulation (EC) X X X X X X X X X X

for motor vehicles No 661/2009

and their trailers UNECE

Regulation No 91

23A Direction indicators Regulation (EC) X X X X X X X X X X for power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 6

24A Illumination of Regulation (EC) X X X X X X X X X X rear-registration No 661/2009

plates of powerdriven

vehicles and UNECE their trailers Regulation No 4

25A Power-driven Regulation (EC) X X X X X X vehicle’s sealed No 661/2009

beam headlamps

(SB) emitting an UNECE European Regulation No 31

asymmetrical passing beam or a driving beam or both

25B Filament lamps for Regulation (EC) X X X X X X X X X X use in approved No 661/2009

lamp units of

power-driven UNECE vehicles and their Regulation No 37

trailers

25C Motor vehicle Regulation (EC) X X X X X X headlamps No 661/2009

equipped with gasdischarge

light UNECE sources Regulation No 98

25D Gas-discharge light Regulation (EC) X X X X X X sources for use in No 661/2009

approved gasdischarge

lamp UNECE units of power Regulation No 99

driven vehicles

25E Motor vehicle Regulation (EC) X X X X X X headlamps emitting No 661/2009

an asymmetrical

passing beam or a UNECE driving beam or Regulation both and equipped No 112

with filament lamps and/or LED modules

25F Adaptive front Regulation (EC) X X X X X X lighting systems No 661/2009

(AFS) for motor

vehicles UNECE Regulation

No 123

26A Power-driven Regulation (EC) X X X X X X vehicle front fog No 661/2009

lamps UNECE

Regulation No 19

27A Towing device Regulation (EC) A A A A A A

No 661/2009

28A Rear fog lamps for Regulation (EC) X X X X X X X X X X power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 38

29A Reversing lights for Regulation (EC) X X X X X X X X X X power-driven No 661/2009

vehicles and their

trailers UNECE Regulation No 23

30A Parking lamps for Regulation (EC) X X X X X X power-driven No 661/2009

vehicles UNECE

Regulation No 77 31A Safety-belts, Regulation (EC) A A A A A A

restraint systems, No 661/2009 child restraint

systems and Isofix UNECE child restraint Regulation No 16

systems

32A Forward field of Regulation (EC) S vision No 661/2009

UNECE Regulation No 125

33A Location and Regulation (EC) X X X X X X identification of No 661/2009

hand controls, telltales

and indicators UNECE Regulation

No 121

34A Windscreen Regulation (EC) A ( 5 ) ( 5 ) ( 5 ) ( 5 ) ( 5 ) defrosting and No 661/2009

demisting systems Regulation (EU)

No 672/2010

35A Windscreen wiper Regulation (EC) A ( 6 ) ( 6 ) ( 6 ) ( 6 ) ( 6 ) and washer systems No 661/2009

36A Heating systems Regulation (EC) X X X X X X X X X X No 661/2009

UNECE Regulation No 122

37A Wheel guards Regulation (EC) X

No 661/2009

38A Head restraints Regulation (EC) X

(headrests), No 661/2009 whether or not

incorporated in UNECE vehicle seats Regulation No 25

41A Emissions (Euro Regulation (EC) 9 X ( ) X ( 9 ) X X ( 9 ) X ( 9 ) X

VI) heavy duty No 595/2009 vehicles/access to information

42A Lateral protection Regulation (EC) X X X X of goods vehicles No 661/2009

UNECE Regulation No 73

43A Spray suppression Regulation (EC) X X X X X X X systems No 661/2009

44A Masses and Regulation (EC) X dimensions No 661/2009

45A Safety glazing Regulation (EC) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A materials and their No 661/2009

installation on

vehicles UNECE Regulation No 43

46 Tyres Directive A A A A A A A A A A 92/23/EEC

46A Installation of tyres Regulation (EC) A A A A A A A A A A No 661/2009

46B Pneumatic tyres for Regulation (EC) A A A A motor vehicles and No 661/2009

their trailers (Class

C1) UNECE Regulation No 30

46C Pneumatic tyres for Regulation (EC) A A A A A A A commercial No 661/2009

vehicles and their

trailers (Classes C2 UNECE and C3) Regulation No 54

46D Tyre rolling sound Regulation (EC) A A A A A A A A A A emissions, No 661/2009

adhesion on wet

surfaces and rolling UNECE resistance (Classes Regulation C1, C2 and C3) No 117

46E Temporary-use Regulation (EC) A( 9A ) A( 9A )

spare unit, run-flat No 661/2009 tyres/system and

tyre pressure UNECE monitoring system Regulation No 64

47A Speed limitation of Regulation (EC) X X X X vehicles No 661/2009

UNECE Regulation No 89

48A Masses and Regulation (EC) X X X X X X X X X dimensions No 661/2009

49A Commercial Regulation (EC) A A A vehicles with No 661/2009

regard to their

external projections UNECE forward of the Regulation No 61

cab’s rear panel

50A Mechanical Regulation (EC) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X X X X coupling No 661/2009

components of

combinations of UNECE vehicles Regulation No 55

50B Close-coupling Regulation (EC) 10 X( ) X( 10 ) X( 10 ) X( 10 ) device (CCD); No 661/2009

fitting of an

approved type of UNECE

CCD Regulation No 102

51A Burning behaviour Regulation (EC) X of materials used in No 661/2009

the interior

construction of UNECE certain categories Regulation of motor vehicles No 118

52A M 2 and M 3 vehicles Regulation (EC) A A

No 661/2009

UNECE Regulation No 107

52B Strength of the Regulation (EC) A A superstructure of No 661/2009

large passenger

vehicles UNECE Regulation No 66

53A Protection of Regulation (EC) N/A occupants in the No 661/2009

event of a frontal

collision UNECE Regulation No 94

54A Protection of Regulation (EC) N/A N/A occupants in the No 661/2009

event of lateral

collision UNECE Regulation No 95

55 (empty)

56A Vehicles for the Regulation (EC) X( 13 ) X( 13 ) X( 13 ) X( 13 ) X( 13 ) X( 13 ) X( 13 ) carriage of No 661/2009

dangerous goods UNECE

Regulation No 105

57A Front underrun Regulation (EC) X X protective devices No 661/2009

(FUPDs) and their

installation; front UNECE underrun protection Regulation No 93

(FUP)

58 Pedestrian Regulation (EC) N/A N/A protection No 78/2009

59 Recyclability Directive N/A N/A 2005/64/EC

60 (empty)

61 Air-conditioning Directive X X( 14 ) system 2006/40/EC

62 Hydrogen system Regulation (EC) A A A A A A No 79/2009

63 General Safety Regulation X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) (EC)

No 661/2009

64 Gear shift Regulation (EC) X indicators No 661/2009

65 Advanced Regulation (EC) ( 16 ) ( 16 ) ( 16 ) ( 16 )

emergency braking No 661/2009

system Regulation (EU)

No 347/2012

66 Lane departure Regulation (EC) ( 17 ) ( 17 ) ( 17 ) ( 17 ) warning system No 661/2009

Regulation (EU) No 1003/2010 i

67 Specific Regulation (EC) X X X X X X components for No 661/2009

liquefied petroleum

gases (LPG) and UNECE their installation on Regulation No 67

motor vehicles

68 Vehicle alarm Regulation (EC) X X systems (VAS) No 661/2009

UNECE Regulation No 97

69 Electrical safety Regulation (EC) X X X X X X No 661/2009

UNECE Regulation No 100

70 Specific Regulation (EC) X X X X X X components for No 661/2009

CNG and their

installation on UNECE

motor vehicles Regulation No 110

Appendix 3

Wheelchair accessible vehicles

Item Subject Regulatory act M 1

1A Sound level Regulation (EU) No 540/2014 i G+W 9

2 Emissions (Euro 5 and 6) light duty vehicles/access to Regulation (EC) No 715/2007 i G+W 1 information

3A Prevention of fire risks (liquid fuel tanks) Regulation (EC) No 661/2009 i X+W 2

UNECE Regulation No 34

3B Rear underrun protective devices (RUPDs) and their Regulation (EC) No 661/2009 i X

installation; rear underrun protection (RUP) UNECE Regulation No 58

4A Space for mounting and fixing rear registration plates Regulation (EC) No 661/2009 i X

5A Steering equipment Regulation (EC) No 661/2009 i G

UNECE Regulation No 79

6A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i X

6B Door latches and door retention components Regulation (EC) No 661/2009 i X

UNECE Regulation No 11

7A Audible warning devices and signals Regulation (EC) No 661/2009 i X

UNECE Regulation No 28

8A Devices for indirect vision and their installation Regulation (EC) No 661/2009 i X

UNECE Regulation No 46

9B Braking of passenger cars Regulation (EC) No 661/2009 i G+A 1

UNECE Regulation No 13-H

10A Electromagnetic compatibility Regulation (EC) No 661/2009 i X

UNECE Regulation No 10

12A Interior fittings Regulation (EC) No 661/2009 i G+C

UNECE Regulation No 21

13B Protection of motor vehicles against unauthorised use Regulation (EC) No 661/2009 i X

UNECE Regulation No 116

14A Protection of the driver against the steering mechanism in Regulation (EC) No 661/2009 i G

the event of impact UNECE Regulation No 12

15A Seats, their anchorages and any head restraints Regulation (EC) No 661/2009 i G+W 3

UNECE Regulation No 17

16A External projections Regulation (EC) No 661/2009 i G+W 4

UNECE Regulation No 26 17A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i X

17B Speedometer equipment including its installation Regulation (EC) No 661/2009 i X

UNECE Regulation No 39

18A Manufacturer’s statutory plate and vehicle identification Regulation (EC) No 661/2009 i X

number Regulation (EU) No 19/2011 i

19A Safety-belt anchorages, Isofix anchorages systems and Regulation (EC) No 661/2009 i X+W 5

Isofix top tether anchorages UNECE Regulation No 14

20A Installation of lighting and light-signalling devices on Regulation (EC) No 661/2009 i X

vehicles UNECE Regulation No 48

21A Retro-reflecting devices for power-driven vehicles and their Regulation (EC) No 661/2009 i X

trailers UNECE Regulation No 3

22A Front and rear position lamps, stop-lamps and end-outline Regulation (EC) No 661/2009 i X

marker lamps for motor vehicles and their trailers UNECE Regulation No 7

22B Daytime running lamps for power-driven vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 87

22C Side-marker lamps for motor vehicles and their trailers Regulation (EC) No 661/2009 i X

UNECE Regulation No 91

23A Direction indicators for power-driven vehicles and their Regulation (EC) No 661/2009 i X

trailers UNECE Regulation No 6

24A Illumination of rear-registration plates of power-driven Regulation (EC) No 661/2009 i X

vehicles and their trailers UNECE Regulation No 4

25A Power-driven vehicle’s sealed-beam headlamps (SB) Regulation (EC) No 661/2009 i X emitting an European asymmetrical passing beam or a

driving beam or both UNECE Regulation No 31

25B Filament lamps for use in approved lamp units of power Regulation (EC) No 661/2009 i X

driven vehicles and their trailers UNECE Regulation No 37

25C Motor vehicle headlamps equipped with gas-discharge light Regulation (EC) No 661/2009 i X

sources UNECE Regulation No 98

25D Gas-discharge light sources for use in approved gas Regulation (EC) No 661/2009 i X

discharge lamp units of power-driven vehicles UNECE Regulation No 99

25E Motor vehicle headlamps emitting an asymmetrical passing Regulation (EC) No 661/2009 i X beam or a driving beam or both and equipped with filament

lamps and/or LED modules UNECE Regulation No 112

25F Adaptive front-lighting systems (AFS) for motor vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 123

26A Power-driven vehicle front fog lamps Regulation (EC) No 661/2009 i X

UNECE Regulation No 19 27A Towing device Regulation (EC) No 661/2009 i E

28A Rear fog lamps for power-driven vehicles and their trailers Regulation (EC) No 661/2009 i X

UNECE Regulation No 38

29A Reversing lights for power-driven vehicles and their trailers Regulation (EC) No 661/2009 i X

UNECE Regulation No 23

30A Parking lamps for power-driven vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 77

31A Safety-belts, restraint systems, child restraint systems and Regulation (EC) No 661/2009 i X+W 6

Isofix child restraint systems UNECE Regulation No 16

32A Forward field of vision Regulation (EC) No 661/2009 i G

UNECE Regulation No 125

33A Location and identification of hand controls, tell-tales and Regulation (EC) No 661/2009 i X

indicators UNECE Regulation No 121

34A Windscreen defrosting and demisting systems Regulation (EC) No 661/2009 i G( 5 )

35A Windscreen wiper and washer systems Regulation (EC) No 661/2009 i G( 6 )

36A Heating systems Regulation (EC) No 661/2009 i X

UNECE Regulation No 122

37A Wheel guards Regulation (EC) No 661/2009 i G

38A Head restraints (headrests), whether or not incorporated in Regulation (EC) No 661/2009 i X

vehicle seats UNECE Regulation No 25

41A Emissions (Euro VI) heavy duty vehicles/access to Regulation (EC) No 595/2009 i X+W 1 information ( 9 )

44A Masses and dimensions Regulation (EC) No 661/2009 i X+W 8

45A Safety glazing materials and their installation on vehicles Regulation (EC) No 661/2009 i G

UNECE Regulation No 43

46 Tyres Directive 92/23/EEC i X

46A Installation of tyres Regulation (EC) No 661/2009 i X

46B Pneumatic tyres for motor vehicles and their trailers (Class Regulation (EC) No 661/2009 i X

C1) UNECE Regulation No 30

46D Tyre rolling sound emissions, adhesion on wet surfaces and Regulation (EC) No 661/2009 i X

rolling resistance (Classes C1, C2 and C3) UNECE Regulation No 117

46E Temporary-use spare unit, run-flat tyres/system and tyre Regulation (EC) No 661/2009 i G( 9A )

pressure monitoring system UNECE Regulation No 64

50A Mechanical coupling components of combinations of Regulation (EC) No 661/2009 i X( 10 )

vehicles UNECE Regulation No 55

53A Protection of occupants in the event of a frontal collision Regulation (EC) No 661/2009 i N/A

UNECE Regulation No 94

54A Protection of occupants in the event of lateral collision Regulation (EC) No 661/2009 i N/A

UNECE Regulation No 95

58 Pedestrian protection Regulation (EC) No 78/2009 i G

59 Recyclability Directive 2005/64/EC i N/A

61 Air-conditioning systems Directive 2006/40/EC i G

62 Hydrogen system Regulation (EC) No 79/2009 i X

63 General Safety Regulation (EC) No 661/2009 i X( 15 )

64 Gear shift indicators Regulation (EC) No 661/2009 i G

Regulation (EU) No 1003/2010 i

67 Specific components for liquefied petroleum gases (LPG) Regulation (EC) No 661/2009 i X

and their installation on motor vehicles UNECE Regulation No 67

68 Vehicle alarm systems (VAS) Regulation (EC) No 661/2009 i X

UNECE Regulation No 97

69 Electric safety Regulation (EC) No 661/2009 i X

UNECE Regulation No 100

70 Specific components for CNG and their installation on Regulation (EC) No 661/2009 i X

motor vehicles UNECE Regulation No 110

Additional requirements for testing the wheelchair tie down and occupant restraint system

The following section 1 and either section 2 or 3 shall apply.

1. Definitions

1.1. Surrogate wheelchair (SWC) means a rigid, re-usable test wheelchair, as defined in section 3 of ISO 10542-1:2012.

1.2. Point P means a representation of the position of the wheelchair occupant's hip when seated in the SWC, as defined in section 3 of ISO 10542-1:2012.

2. General requirements

2.1. Each wheelchair location shall be provided with anchorages to which a wheelchair tiedown and occupant restraint system (WTORS) shall be fitted.

2.2. The wheelchair occupant’s lower belt anchorages shall be located in accordance with UNECE Regulation No 14-07, paragraph 5.4.2.2, relative to Point P on the SWC, when placed in the travelling position designated by the manufacturer. The upper actual anchorage(s) shall be located at least 1 100 mm above the horizontal plane passing through the points of contact between the rear tyres of the SWC and the vehicle floor. This condition shall still be satisfied after the test carried out according to point 3 of this Appendix.

2.3. An assessment shall be made of the WTORS occupant belt to ensure compliance with the provisions of UNECE Regulation No 16-06, paragraphs 8.2.2 to 8.2.2.4 and 8.3.1 to 8.3.4.

2.4. The minimum number of ISOFIX child seat anchorages need not to be provided. In the case of a multi-stage type-approval where an ISOFIX anchorage system has been affected by the conversion, either the system shall be re-tested or the anchorages shall be rendered unusable. In the latter case the ISOFIX labels shall be removed and appropriate information shall be given to the vehicle purchaser.

3. Static in-vehicle testing

3.1. Wheelchair occupant restraint anchorages

3.1.1. The wheelchair occupant restraint anchorages shall resist the static forces prescribed for occupant restraint anchorages in UNECE Regulation No 14-07, simultaneously with the static forces applied to the wheelchair tie-down anchorages as specified in point 3.2 of this Appendix.

3.2. Wheelchair tie-down anchorages

The wheelchair tie-down anchorages shall resist the following forces, for at least 0.2 seconds, applied via the SWC (or a suitable surrogate wheelchair having a wheelbase, seat height and tie-down attachment points in accordance with the specification for the SWC), at a height of 300 +/– 100 mm from the surface on which the SWC rests:

3.2.1. In the case of a forward-facing wheelchair, a simultaneous force, coincident with the force applied to the occupant restraint anchorages, of 24,5 kN, and

3.2.2. a second test applying a static force of 8,2 kN directed towards the rear of the vehicle.

3.2.3. In the case of a rearward-facing wheelchair, a simultaneous force, coincident with the force applied to the occupant restraint anchorages, of 8,2 kN, and

3.2.4. a second test applying a static force of 24,5 kN directed towards the front of the vehicle.

3.3. Components of the system

3.3.1. All components of the WTORS shall meet the relevant requirements of ISO 10542- 1:2012. However, the dynamic test specified in Annex A and paragraphs 5.2.2 and 5.2.3 of ISO 10542-1:2012 shall be carried out on the complete WTORS using the vehicle anchorage geometry instead of the test geometry specified in Annex A of ISO 10542- 1:2012. This may be carried out within the vehicle structure or on a surrogate structure representative of the vehicle’s WTORS anchorage geometry. The location of each anchorage shall lie within the tolerance provided for in paragraph 7.7.1 of UNECE Regulation No 16-06.

3.3.2. Where the occupant restraint part of the WTORS is approved according to UNECE Regulation No 16-06, it shall be subject to the dynamic test of the complete WTORS specified in paragraph 3.3.1 of this appendix but the requirements of paragraphs 5.1, 5.3 and 5.4 of ISO10542-1:2012 shall be considered to have been met.

4. Dynamic in-vehicle testing

4.1. The full assembly of the WTORS system shall be tested by an in-vehicle dynamic test in accordance with paragraphs 5.2.2 and 5.2.3 and Annex A of ISO 10542-1:2012, testing all components/anchorages simultaneously, using a vehicle body-in-white or representative structure.

4.2. The component parts of the WTORS shall meet the relevant requirements of ISO10542- 1:2012, paragraphs 5.1, 5.3 and 5.4. These requirements shall be deemed to have been met in respect of the occupant restraint if it is approved according to UNECE Regulation No 16-06.

Appendix 4

Other special purpose vehicles (including special group, multi-equipment carrier and trailer caravans)

The exemptions provided for in this appendix are only permitted if the manufacturer demonstrates to the satisfaction of the approval authority that the vehicle, due to the special function, cannot meet all the requirements set out in Part I of Annex IV.

Item Subject Reference to M 2 M 3 N 1 N 2 N 3 O 1 O 2 O 3 O 4 regulatory act

1A Sound level Regulation (EU) H H H H H

No 540/2014

2 Emissions (Euro 5 and 6) light Regulation (EC) Q( 1 ) Q+V 1 Q+V 1

duty vehicles/access to No 715/2007 ( 1 ) ( 1 ) information

3A Prevention of fire risks (liquid Regulation (EC) F F F F F X X X X fuel tanks) No 661/2009

UNECE Regulation No 34

3B Rear underrun protective Regulation (EC) X X A A A X X X X devices (RUPDs) and their No 661/2009

installation; rear underrun

protection (RUP) UNECE Regulation No 58

4A Space for mounting and fixing Regulation (EC) A+R A+R A+R A+R A+R A+R A+R A+R A+R rear registration plates No 661/2009

5A Steering equipment Regulation (EC) X X X X X X X X X No 661/2009

UNECE Regulation No 79

6A Vehicle access and Regulation (EC) X X B B B manoeuvrability No 661/2009

6B Door latches and door Regulation (EC) B retention components No 661/2009

UNECE Regulation No 11

7A Audible warning devices and Regulation (EC) X X X X X signals No 661/2009

UNECE Regulation No 28

8A Devices for indirect vision and Regulation (EC) X X X X X their installation No 661/2009

UNECE Regulation No 46

9A Braking of vehicles and Regulation (EC) X ( 3 ) X ( 3 3 ) X ( ) X+U 1 X+U 3 1 X X X ( ) X ( 3 ) trailers No 661/2009 ( 3 ) ( 3 )

UNECE Regulation No 13

9B Braking of passenger cars Regulation (EC) 4 X ( )

No 661/2009

UNECE Regulation No 13- H

10A Electromagnetic compatibility Regulation (EC) X X X X X X X X X No 661/2009

UNECE Regulation No 10

13A Protection of motor vehicles Regulation (EC) X( 4A ) X( 4A ) X( 4A ) X( 4A )

against unauthorised use No 661/2009

UNECE Regulation No 18

13B Protection of motor vehicles Regulation (EC) X against unauthorised use No 661/2009

UNECE Regulation No 116

14A Protection of the driver against Regulation (EC) X the steering mechanism in the No 661/2009

event of impact UNECE

Regulation No 12

15A Seats, their anchorages and Regulation (EC) D( 4B ) D( 4B ) D D D any head restraints No 661/2009

UNECE Regulation No 17

15B Seats of large passenger Regulation (EC) D D vehicles No 661/2009

UNECE Regulation No 80

17A Vehicle access and Regulation (EC) X X X X X manoeuvrability No 661/2009

17B Speedometer equipment Regulation (EC) X X X X X including its installation No 661/2009

UNECE Regulation No 39

18A Manufacturer’s statutory plate Regulation (EC) X X X X X X X X X and vehicle identification No 661/2009

number Regulation (EU)

No 19/2011 19A Safety-belt anchorages, Isofix Regulation (EC) D D D D D

anchorages systems and Isofix No 661/2009

top tether anchorages UNECE

Regulation No 14

20A Installation of lighting and Regulation (EC) A+N A+N A+N A+N A+N A+N A+N A+N A+N light-signalling devices on No 661/2009

vehicles UNECE

Regulation No 48

21A Retro-reflecting devices for Regulation (EC) X X X X X X X X X power-driven vehicles and No 661/2009

their trailers UNECE

Regulation No 3

22A Front and rear position lamps, Regulation (EC) X X X X X X X X X stop-lamps and end-outline No 661/2009

marker lamps for motor

vehicles and their trailers UNECE Regulation No 7

22B Daytime running lamps for Regulation (EC) X X X X X power-driven vehicles No 661/2009

UNECE Regulation No 87

22C Side-marker lamps for motor Regulation (EC) X X X X X X X X X vehicles and their trailers No 661/2009

UNECE Regulation No 91

23A Direction indicators for Regulation (EC) X X X X X X X X X power-driven vehicles and No 661/2009

their trailers UNECE

Regulation No 6

24A Illumination of rear Regulation (EC) X X X X X X X X X registration plates of power No 661/2009

driven vehicles and their

trailers UNECE Regulation No 4

25A Power-driven vehicle’s sealed Regulation (EC) X X X X X beam headlamps (SB) No 661/2009

emitting an European

asymmetrical passing beam or UNECE a driving beam or both Regulation No 31

25B Filament lamps for use in Regulation (EC) X X X X X X X X X approved lamp units of power No 661/2009

driven vehicles and their

trailers UNECE Regulation No 37

25C Motor vehicle headlamps Regulation (EC) X X X X X equipped with gas-discharge No 661/2009

light sources UNECE

Regulation No 98 25D Gas-discharge light sources Regulation (EC) X X X X X

for use in approved gas No 661/2009 discharge lamp units of

power-driven vehicles UNECE Regulation No 99

25E Motor vehicle headlamps Regulation (EC) X X X X X emitting an asymmetrical No 661/2009

passing beam or a driving

beam or both and equipped UNECE with filament lamps and/or Regulation No 112

LED modules

25F Adaptive front-lighting Regulation (EC) X X X X X systems (AFS) for motor No 661/2009

vehicles UNECE

Regulation No 123

26A Power-driven vehicle front fog Regulation (EC) X X X X X lamps No 661/2009

UNECE Regulation No 19

27A Towing device Regulation (EC) A A A A A

No 661/2009

28A Rear fog lamps for power Regulation (EC) X X X X X X X X X driven vehicles and their No 661/2009

trailers UNECE

Regulation No 38

29A Reversing lights for power Regulation (EC) X X X X X X X X X driven vehicles and their No 661/2009

trailers UNECE

Regulation No 23

30A Parking lamps for power Regulation (EC) X X X X X driven vehicles No 661/2009

UNECE Regulation No 77

31A Safety-belts, restraint systems, Regulation (EC) D D D D D child restraint systems and No 661/2009

Isofix child restraint systems UNECE

Regulation No 16

33A Location and identification of Regulation (EC) X X X X X hand controls, tell-tales and No 661/2009

indicators UNECE

Regulation No 121

34A Windscreen defrosting and Regulation (EC) ( 5 ) ( 5 ) ( 5 ) ( 5 ) ( 5 ) demisting systems No 661/2009

35A Windscreen wiper and washer Regulation (EC) ( 6 ) ( 6 ) ( 6 ) ( 6 ) ( 6 ) systems No 661/2009

36A Heating systems Regulation (EC) X X X X X X X X X No 661/2009

UNECE Regulation No 122

38A Head restraints (headrests), Regulation (EC) X whether or not incorporated in No 661/2009

vehicle seats UNECE

Regulation No 25

41A Emissions (Euro VI) heavy Regulation (EC) H ( 9 ) H H ( 9 ) H ( 9 ) H duty vehicles/access to No 595/2009

information

42A Lateral protection of goods Regulation (EC) X X X X vehicles No 661/2009

UNECE Regulation No 73

43A Spray suppression systems Regulation (EC) X X X X X X X No 661/2009

45A Safety glazing materials and Regulation (EC) J J J J J J J J J their installation on vehicles No 661/2009

UNECE Regulation No 43

46 Tyres Directive X X X X X X X X X 92/23/EEC

46A Installation of tyres Regulation (EC) X X X X X X X X X No 661/2009

46B Pneumatic tyres for motor Regulation (EC) X X X vehicles and their trailers No 661/2009

(Class C1) UNECE

Regulation No 30

46C Pneumatic tyres for Regulation (EC) X X X X X X X commercial vehicles and their No 661/2009

trailers (Classes C2 and C3) UNECE

Regulation No 54

46D Tyre rolling sound emissions, Regulation (EC) X X X X X X X X X adhesion on wet surfaces and No 661/2009

rolling resistance (Classes C1,

C2 and C3) UNECE Regulation No 117

46E Temporary-use spare unit, Regulation (EC) X ( 9A )

run-flat tyres/system and tyre No 661/2009

pressure monitoring system UNECE

Regulation No 64

47A Speed limitation of vehicles Regulation (EC) X X X X

No 661/2009

UNECE Regulation No 89

48A Masses and dimensions Regulation (EC) X X X X X X X X X No 661/2009

49A Commercial vehicles with Regulation (EC) X X X regard to their external No 661/2009

projections forward of the

cab’s rear panel UNECE Regulation No 61

50A Mechanical coupling Regulation (EC) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X( 10 ) X X X X components of combinations No 661/2009

of vehicles UNECE

Regulation No 55

50B Close-coupling device (CCD); Regulation (EC) X( 10 ) X( 10 ) X( 10 ) X( 10 )

fitting of an approved type of No 661/2009

CCD UNECE

Regulation No 102

51A Burning behaviour of Regulation (EC) X materials used in the interior No 661/2009

construction of certain

categories of motor vehicles UNECE Regulation No 118

52A M 2 and M 3 vehicles Regulation (EC) X X

No 661/2009

UNECE Regulation No 107

52B Strength of the superstructure Regulation (EC) X X of large passenger vehicles No 661/2009

UNECE Regulation No 66

54A Protection of occupants in the Regulation (EC) A event of lateral collision No 661/2009

UNECE Regulation No 95

56A Vehicles for the carriage of Regulation (EC) X ( 13 ) X ( 13 ) X ( 13 ) X( 13 ) X( 13 13 ) X( ) X( 13 )

dangerous goods No 661/2009

UNECE Regulation No 105

57A Front underrun protective Regulation (EC) X X devices (FUPDs) and their No 661/2009

installation; front underrun

protection (FUP) UNECE Regulation No 93

58 Pedestrian protection Regulation (EC) N/A

No 78/2009 ( 2 )

59 Recyclability Directive N/A

2005/64/EC

61 Air-conditioning systems Directive X ( 14 )

2006/40/EC

62 Hydrogen system Regulation (EC) X X X X X

No 79/2009

63 General Safety Regulation (EC) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 ) X( 15 15 ) X( ) X( 15 )

No 661/2009

65 Advanced emergency braking Regulation (EC) N/A N/A N/A N/A system No 661/2009

66 Lane departure warning Regulation (EC) N/A N/A N/A N/A system No 661/2009

Regulation (EU) No 1003/2010 i

67 Specific components for Regulation (EC) X X X X X liquefied petroleum gases No 661/2009

(LPG) and their installation on

motor vehicles UNECE Regulation No 67

68 Vehicle alarm systems (VAS) Regulation (EC) X

No 661/2009

UNECE Regulation No 97

69 Electric safety Regulation (EC) X X X X X

No 661/2009

UNECE Regulation No 100

70 Specific components for CNG Regulation (EC) X X X X X and their installation on motor No 661/2009

vehicles UNECE

Regulation No 110

Appendix 5

Mobile cranes

Item Subject Reference to regulatory act N 3

1A Sound level Regulation (EU) No 540/2014 i T + Z 1

3A Prevention of fire risks (liquid fuel tanks) Regulation (EC) No 661/2009 i X

UNECE Regulation No 34

3B Rear underrun protective devices (RUPDs) and their Regulation (EC) No 661/2009 i A

installation; rear underrun protection (RUP) UNECE Regulation No 58

4A Space for mounting and fixing rear registration plates Regulation (EC) No 661/2009 i X

5A Steering equipment Regulation (EC) No 661/2009 i X

UNECE Regulation No 79 Crab steering allowed

6A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i A

7A Audible warning devices and signals Regulation (EC) No 661/2009 i X

UNECE Regulation No 28

8A Devices for indirect vision and their installation Regulation (EC) No 661/2009 i X

UNECE Regulation No 46

9A Braking of vehicles and trailers Regulation (EC) No 661/2009 i U ( 3 )

UNECE Regulation No 13

10A Electromagnetic compatibility Regulation (EC) No 661/2009 i X

UNECE Regulation No 10

13A Protection of motor vehicles against unauthorised use Regulation (EC) No 661/2009 i 4A X ( )

UNECE Regulation No 18

15A Seats, their anchorages and any head restraints Regulation (EC) No 661/2009 i X

UNECE Regulation No 17

17A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i X

17B Speedometer equipment including its installation Regulation (EC) No 661/2009 i X

UNECE Regulation No 39

18A Manufacturer’s statutory plate and vehicle Regulation (EC) No 661/2009 i X

identification number Regulation (EU) No 19/2011 i

19A Safety-belt anchorages, Isofix anchorages systems and Regulation (EC) No 661/2009 i X

Isofix top tether anchorages UNECE Regulation No 14

20A Installation of lighting and light-signalling devices on Regulation (EC) No 661/2009 i A+Y

vehicles UNECE Regulation No 48

21A Retro-reflecting devices for power-driven vehicles Regulation (EC) No 661/2009 i X

and their trailers UNECE Regulation No 3

22A Front and rear position lamps, stop-lamps and end Regulation (EC) No 661/2009 i X outline marker lamps for motor vehicles and their

trailers UNECE Regulation No 7

22B Daytime running lamps for power-driven vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 87

22C Side-marker lamps for motor vehicles and their Regulation (EC) No 661/2009 i X

trailers UNECE Regulation No 91

23A Direction indicators for power-driven vehicles and Regulation (EC) No 661/2009 i X

their trailers UNECE Regulation No 6

24A Illumination of rear-registration plates of power Regulation (EC) No 661/2009 i X

driven vehicles and their trailers UNECE Regulation No 4

25A Power-driven vehicle’s sealed-beam headlamps (SB) Regulation (EC) No 661/2009 i X emitting an European asymmetrical passing beam or a

driving beam or both UNECE Regulation No 31

25B Filament lamps for use in approved lamp units of Regulation (EC) No 661/2009 i X

power-driven vehicles and their trailers UNECE Regulation No 37

25C Motor vehicle headlamps equipped with gas-discharge Regulation (EC) No 661/2009 i X

light sources UNECE Regulation No 98

25D Gas-discharge light sources for use in approved gas Regulation (EC) No 661/2009 i X

discharge lamp units of power-driven vehicles UNECE Regulation No 99

25E Motor vehicle headlamps emitting an asymmetrical Regulation (EC) No 661/2009 i X passing beam or a driving beam or both and equipped

with filament lamps and/or LED modules UNECE Regulation No 112

25F Adaptive front-lighting systems (AFS) for motor Regulation (EC) No 661/2009 i X

vehicles UNECE Regulation No 123

26A Power-driven vehicle front fog lamps Regulation (EC) No 661/2009 i X

UNECE Regulation No 19

27A Towing device Regulation (EC) No 661/2009 i A

28A Rear fog lamps for power-driven vehicles and their Regulation (EC) No 661/2009 i X

trailers UNECE Regulation No 38

29A Reversing lights for power-driven vehicles and their Regulation (EC) No 661/2009 i X

trailers UNECE Regulation No 23

30A Parking lamps for power-driven vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 77

31A Safety-belts, restraint systems, child restraint systems Regulation (EC) No 661/2009 i X

and Isofix child restraint systems UNECE Regulation No 16

33A Location and identification of hand controls, tell-tales Regulation (EC) No 661/2009 i X

and indicators UNECE Regulation No 121

34A Windscreen defrosting and demisting systems Regulation (EC) No 661/2009 i ( 5 )

35A Windscreen wiper and washer systems Regulation (EC) No 661/2009 i ( 6 )

36A Heating systems Regulation (EC) No 661/2009 i X

UNECE Regulation No 122

41A Emissions (Euro VI) heavy duty vehicles/access to Regulation (EC) No 595/2009 i V information

42A Lateral protection of goods vehicles Regulation (EC) No 661/2009 i A

UNECE Regulation No 73

43A Spray suppression systems Regulation (EC) No 661/2009 i Z 1

45A Safety glazing materials and their installation on Regulation (EC) No 661/2009 i J

vehicles UNECE Regulation No 43

46 Tyres Directive 92/23/EEC i X

46A Installation of tyres Regulation (EC) No 661/2009 i X

46C Pneumatic tyres for commercial vehicles and their Regulation (EC) No 661/2009 i X

trailers (Classes C2 and C3) UNECE Regulation No 54

46D Tyre rolling sound emissions, adhesion on wet Regulation (EC) No 661/2009 i X surfaces and rolling resistance (Classes C1, C2 and

C3) UNECE Regulation No 117

47A Speed limitation of vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 89

48A Masses and dimensions Regulation (EC) No 661/2009 i A

49A Commercial vehicles with regard to their external Regulation (EC) No 661/2009 i A

projections forward of the cab’s rear panel UNECE Regulation No 61

50A Mechanical coupling components of combinations of Regulation (EC) No 661/2009 i 10 X ( )

vehicles UNECE Regulation No 55

50B Close-coupling device (CCD); fitting of an approved Regulation (EC) No 661/2009 i 10 X ( )

type of CCD UNECE Regulation No 102

57A Front underrun protective devices (FUPDs) and their Regulation (EC) No 661/2009 i X

installation; front underrun protection (FUP) UNECE Regulation No 93

62 Hydrogen system Regulation (EC) No 79/2009 i X

63 General Safety Regulation (EC) No 661/2009 i 15 X ( ) 65 Advanced emergency braking system Regulation (EC) No 661/2009 i N/A ( 16 )

66 Lane departure warning system Regulation (EC) No 661/2009 i N/A ( 17 )

67 Specific components for liquefied petroleum gases Regulation (EC) No 661/2009 i X

(LPG) and their installation on motor vehicles UNECE Regulation No 67

69 Electric safety Regulation (EC) No 661/2009 i X

UNECE Regulation No 100

70 Specific components for CNG and their installation on Regulation (EC) No 661/2009 i X

motor vehicles UNECE Regulation No 110

Appendix 6

Exceptional load transport trailers

Item Subject Reference to regulatory act N 3 O 4

1 Permissible sound level Directive 70/157/EEC i T

3A Prevention of fire risks (liquid fuel tanks) Regulation (EC) No 661/2009 i X X

UNECE Regulation No 34

3B Rear underrun protective devices (RUPDs) Regulation (EC) No 661/2009 i A A and their installation; rear underrun

protection (RUP) UNECE Regulation No 58

4A Space for mounting and fixing rear Regulation (EC) No 661/2009 i X A+R

registration plates Regulation (EU) No 1003/2010 i

5A Steering equipment Regulation (EC) No 661/2009 i X X

UNECE Regulation No 79 Crab steering allowed

6A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i X

7A Audible warning devices and signals Regulation (EC) No 661/2009 i X

UNECE Regulation No 28

8A Devices for indirect vision and their Regulation (EC) No 661/2009 i X

installation UNECE Regulation No 46

9A Braking of vehicles and trailers Regulation (EC) No 661/2009 i 3 U ( ) 3 X ( )

UNECE Regulation No 13

10A Electromagnetic compatibility Regulation (EC) No 661/2009 i X X

UNECE Regulation No 10

13A Protection of motor vehicles against Regulation (EC) No 661/2009 i X ( 4A )

unauthorised use UNECE Regulation No 18

15A Seats, their anchorages and any head Regulation (EC) No 661/2009 i X

restraints UNECE Regulation No 17

17A Vehicle access and manoeuvrability Regulation (EC) No 661/2009 i X

17B Speedometer equipment including its Regulation (EC) No 661/2009 i X

installation UNECE Regulation No 39

18A Manufacturer’s statutory plate and vehicle Regulation (EC) No 661/2009 i X X

identification number Regulation (EU) No 19/2011 i

19A Safety-belt anchorages, Isofix anchorages Regulation (EC) No 661/2009 i X

systems and Isofix top tether anchorages UNECE Regulation No 14

20A Installation of lighting and light-signalling Regulation (EC) No 661/2009 i X A+N

devices on vehicles UNECE Regulation No 48

21A Retro-reflecting devices for power-driven Regulation (EC) No 661/2009 i X X

vehicles and their trailers UNECE Regulation No 3

22A Front and rear position lamps, stop-lamps Regulation (EC) No 661/2009 i X X and end-outline marker lamps for motor

vehicles and their trailers UNECE Regulation No 7

22B Daytime running lamps for power-driven Regulation (EC) No 661/2009 i X

vehicles UNECE Regulation No 87

22C Side-marker lamps for motor vehicles and Regulation (EC) No 661/2009 i X X

their trailers UNECE Regulation No 91

23A Direction indicators for power-driven Regulation (EC) No 661/2009 i X X

vehicles and their trailers UNECE Regulation No 6

24A Illumination of rear-registration plates of Regulation (EC) No 661/2009 i X X

power-driven vehicles and their trailers UNECE Regulation No 4

25A Power-driven vehicle’s sealed-beam Regulation (EC) No 661/2009 i X headlamps (SB) emitting an European

asymmetrical passing beam or a driving UNECE Regulation No 31

beam or both

25B Filament lamps for use in approved lamp Regulation (EC) No 661/2009 i X X units of power-driven vehicles and their

trailers UNECE Regulation No 37

25C Motor vehicle headlamps equipped with Regulation (EC) No 661/2009 i X

gas-discharge light sources UNECE Regulation No 98

25D Gas-discharge light sources for use in Regulation (EC) No 661/2009 i X approved gas-discharge lamp units of

power-driven vehicles UNECE Regulation No 99

25E Motor vehicle headlamps emitting an Regulation (EC) No 661/2009 i X asymmetrical passing beam or a driving

beam or both and equipped with filament UNECE Regulation No 112

lamps and/or LED modules

25F Adaptive front-lighting systems (AFS) for Regulation (EC) No 661/2009 i X

motor vehicles UNECE Regulation No 123

26A Power-driven vehicle front fog lamps Regulation (EC) No 661/2009 i X

UNECE Regulation No 19

27A Towing device Regulation (EC) No 661/2009 i A

28A Rear fog lamps for power-driven vehicles Regulation (EC) No 661/2009 i X X

and their trailers UNECE Regulation No 38

29A Reversing lights for power-driven vehicles Regulation (EC) No 661/2009 i X X

and their trailers UNECE Regulation No 23

30A Parking lamps for power-driven vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 77

31A Safety-belts, restraint systems, child Regulation (EC) No 661/2009 i X restraint systems and Isofix child restraint

systems UNECE Regulation No 16

33A Location and identification of hand Regulation (EC) No 661/2009 i X

controls, tell-tales and indicators UNECE Regulation No 121

34A Windscreen defrosting and demisting Regulation (EC) No 661/2009 i ( 5 )

systems Regulation (EU) No 672/2010 i

35A Windscreen wiper and washer systems Regulation (EC) No 661/2009 i ( 6 )

36A Heating systems Regulation (EC) No 661/2009 i X

UNECE Regulation No 122

41A Emissions (Euro VI) heavy duty Regulation (EC) No 595/2009 i 9 X ( ) vehicles/access to information

42A Lateral protection of goods vehicles Regulation (EC) No 661/2009 i X A

UNECE Regulation No 73

43A Spray suppression systems Regulation (EC) No 661/2009 i X A

45 Safety glazing Directive 92/22/EEC i X

45A Safety glazing materials and their Regulation (EC) No 661/2009 i X

installation on vehicles UNECE Regulation No 43

46 Tyres Directive 92/23/EEC i X I

46A Installation of tyres Regulation (EC) No 661/2009 i X I

46C Pneumatic tyres for commercial vehicles Regulation (EC) No 661/2009 i X I

and their trailers (Classes C2 and C3) UNECE Regulation No 54

46D Tyre rolling sound emissions, adhesion on Regulation (EC) No 661/2009 i X I wet surfaces and rolling resistance (Classes

C1, C2 and C3) UNECE Regulation No 117

47A Speed limitation of vehicles Regulation (EC) No 661/2009 i X

UNECE Regulation No 89

48A Masses and dimensions Regulation (EC) No 661/2009 i A A

49A Commercial vehicles with regard to their Regulation (EC) No 661/2009 i A external projections forward of the cab’s

rear panel UNECE Regulation No 61

50A Mechanical coupling components of Regulation (EC) No 661/2009 i X( 10 ) X

combinations of vehicles UNECE Regulation No 55

50B Close-coupling device (CCD); fitting of an Regulation (EC) No 661/2009 i X( 10 ) X( 10 )

approved type of CCD UNECE Regulation No 102

56A Vehicles for the carriage of dangerous Regulation (EC) No 661/2009 i X( 13 ) X( 13 )

goods UNECE Regulation No 105

57A Front underrun protective devices (FUPDs) Regulation (EC) No 661/2009 i A and their installation; front underrun

protection (FUP) UNECE Regulation No 93

62 Hydrogen system Regulation (EC) No 79/2009 i X

63 General Safety Regulation (EC) No 661/2009 i X ( 15 ) X( 15 )

65 Advanced emergency braking system Regulation (EC) No 661/2009 i 16 N/A ( )

66 Lane departure warning system Regulation (EC) No 661/2009 i 17 N/A ( )